暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR4 RDIMM module with black chips on both sides no heat spreader 288 gold pins

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 ECC RDIMM 1Rx4 CL21 memory upgrade

SKU CH-40FA-NS1GK

Adds 16 GB of DDR4 ECC registered server memory at 2933 MHz with CL21 latency

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption with registered DDR4 architecture
  • 16 GB capacity expands server memory for heavier workloads
  • 2933 MT/s speed delivers high bandwidth for demanding applications
  • 2 V operation reduces power draw in dense configurations
  • 288-pin RDIMM form factor fits compatible Micron server platforms

Micron-compatible DDR4 ECC RDIMM

This 16 GB DDR4 module runs at 2933 MT/s with a CL21 latency and operates at 1.20 V. It is a registered single-rank 1Rx4 design built for Micron MTA18ASF2G72PZ-2G9 platforms. The 288-pin RDIMM form factor fits server and workstation motherboards that require ECC registered memory.

Sustained throughput with error correction

Registered buffering and ECC keep data integrity intact during long compute runs and virtualised workloads. The 1Rx4 organisation delivers consistent bandwidth without the variability seen in unbuffered consumer modules. CL21 timing supports stable operation across extended sessions in multi-socket environments.

Low-voltage operation without a heat spreader

At 1.20 V the module draws minimal power and runs cool in densely populated DIMM slots. The absence of a heat spreader reduces height for tight chassis clearances while passive airflow handles thermal load. Silent operation is maintained in rackmount and tower servers alike.

特長

  • ECC protection prevents data corruption with registered DDR4 architecture
  • 16 GB capacity expands server memory for heavier workloads
  • 2933 MT/s speed delivers high bandwidth for demanding applications
  • 2 V operation reduces power draw in dense configurations
  • 288-pin RDIMM form factor fits compatible Micron server platforms

仕様

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-614K1
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemMICRON
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2933MHZ PC4-23400 1Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

この商品に関する質問

How much heat and power does this 1.20 V DDR4 2933 ECC RDIMM add when the server runs continuously?

The module operates at 1.20 V with no heat spreader, so it adds minimal thermal load and draws standard DDR4 power for a 16 GB registered DIMM.

What must the motherboard already provide for this 288-pin registered DIMM to function?

The board needs a DDR4 RDIMM slot, support for ECC registered memory, and a memory controller that can run at 2933 MT/s with CL21 timing.

Will this 1Rx4 CL21 module work alongside older DDR4 ECC RDIMMs of different ranks or speeds?

It can run in the same channel as other DDR4 ECC RDIMMs, but the system will clock all modules to the lowest common speed and timings; mixing ranks is supported by most server chipsets.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。