暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR4 RDIMM module with black chips and gold edge contacts

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 PC4-23400 2Rx8 CL21 1.2V 288-Pin ECC RDIMM Dell PowerEdge R940 memory upgrade

SKU CH-R42P-0671K

Adds 16 GB of 2933 MHz DDR4 ECC registered memory to a Dell PowerEdge R940 server

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 2933 MHz adds responsive capacity for Dell PowerEdge R940
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • CL21 latency at 1.2 V balances speed with low power draw
  • 288-pin 2Rx8 RDIMM fits the server memory slots without adapters
  • Built with Samsung, Micron or Hynix chips for enterprise-grade reliability

Dell PowerEdge R940 ECC RDIMM

This 16 GB DDR4 module is built for the Dell PowerEdge R940 server. It carries ECC and registered operation to protect data integrity in enterprise workloads. The single-stick design lets administrators add capacity one slot at a time.

Tool-free DIMM installation

The 288-pin RDIMM seats in the standard DDR4 server slots without extra brackets or cables. Alignment keys prevent backwards insertion, and the low-profile form clears most CPU coolers. Common issues arise when mixing ranks or speeds across channels, so match the existing CL21 2933 MT/s specification.

Registered ECC at 2933 MT/s

The registered buffer and on-die ECC are the decisive spec for R940 compatibility; unbuffered or non-ECC modules will not post. This stick delivers PC4-23400 bandwidth at 1.2 V with a 2Rx8 organisation. Buyers needing non-ECC or higher-frequency memory should look elsewhere.

特長

  • 16 GB DDR4 2933 MHz adds responsive capacity for Dell PowerEdge R940
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • CL21 latency at 1.2 V balances speed with low power draw
  • 288-pin 2Rx8 RDIMM fits the server memory slots without adapters
  • Built with Samsung, Micron or Hynix chips for enterprise-grade reliability

仕様

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-628K1
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

この商品に関する質問

How do I confirm the module is running at DDR4 2933 PC4-23400 with ECC active after installing it in the PowerEdge R940?

Enter the system BIOS or iDRAC interface after boot; the memory configuration screen will show each DIMM running at 2933 MT/s, PC4-23400 data rate, CL21 latency, 1.2 V, and ECC status as enabled for the registered 2Rx8 module.

What comes in the package and what must be sourced separately for the Dell PowerEdge R940 upgrade?

The box contains one 16 GB 288-pin DDR4 RDIMM (part MR23400-628K1); no heat spreader, tools, cables or additional DIMMs are included, so any extra modules or server rail kits must be purchased separately.

Which capacity and rank configuration should I choose for the R940 when the options include this 16 GB 2Rx8 registered ECC RDIMM?

Select this 16 GB 2Rx8 CL21 1.2 V module when you need a single registered ECC DIMM to populate an empty slot or match existing 2Rx8 sticks; the 288-pin DDR4 2933 specification ensures compatibility with the R940 memory architecture.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。