暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black chips, 260-pin SODIMM form factor

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 260-pin SODIMM POSIFLEX EK-1650 memory upgrade

SKU CH-TEHH-2DV69

16GB DDR4 3200 CL22 SODIMM module designed for the POSIFLEX EK-1650 kiosk system

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 3200MHz boosts POS kiosk responsiveness
  • CL22 latency with 1.2V operation keeps power draw low
  • 2Rx8 dual-rank layout fills one 260-pin SODIMM slot
  • Samsung Micron Hynix chips validated for POSIFLEX EK-1650 compatibility
  • Non-ECC unbuffered design installs in minutes without tools

POSIFLEX EK-1650 Kiosk Upgrade

This 16 GB DDR4 SODIMM is built to match the POSIFLEX EK-1650 Mercury Series kiosk. It runs at 3200 MHz with CL22 latency and 1.2 V operation. The single 260-pin module uses 2Rx8 unbuffered chips from major OEM suppliers.

Service Engineers Not General Builders

Technicians maintaining or expanding the specified POSIFLEX kiosk line will find the correct form factor and voltage. Anyone upgrading a laptop, desktop, server or different POS platform should look elsewhere because the module is validated only for this system.

Drops Into the Single SODIMM Slot

Installation requires only the kiosk's existing memory slot and no additional cooling or power changes. The non-ECC unbuffered design keeps the memory controller simple while the 16 GB capacity frees headroom for multi-application workloads.

特長

  • 16GB DDR4 3200MHz boosts POS kiosk responsiveness
  • CL22 latency with 1.2V operation keeps power draw low
  • 2Rx8 dual-rank layout fills one 260-pin SODIMM slot
  • Samsung Micron Hynix chips validated for POSIFLEX EK-1650 compatibility
  • Non-ECC unbuffered design installs in minutes without tools

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

Will this 260-pin DDR4 SODIMM work in my POSIFLEX EK-1650 kiosk?

Yes, the module is built for the POSIFLEX EK-1650 Mercury Series kiosk and matches the DDR4 3200 PC4-25600 specification required by that system.

Can I keep my existing DDR4 memory and add this 16GB stick alongside it?

If your kiosk has a free SODIMM slot, this unbuffered non-ECC CL22 module can be installed with other DDR4 SODIMMs, though mixing speeds or latencies may cause the system to run at the lowest common setting.

How do I confirm the 16GB DDR4 3200 module is recognised after installation?

Power on the kiosk, enter the BIOS or OS system information and verify that 16GB appears at 3200MT/s with CL22 timing and 1.20V operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。