暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, 260-pin SODIMM form factor

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 260-Pin SODIMM POSIFLEX TK-3251

SKU CH-GZC4-GKJFN

16GB DDR4 3200 CL22 SODIMM built for POSIFLEX TK-3251 kiosks, 260-pin unbuffered non-ECC module installs in minutes

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 MHz module boosts POS kiosk responsiveness
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM fits POSIFLEX TK-3251 Paragon kiosks directly
  • 2Rx8 dual-rank layout maximises density in a single slot
  • Major-brand Samsung Micron Hynix chips ensure enterprise-grade reliability

POSIFLEX TK-3251 system memory

This 16GB DDR4 SODIMM is built specifically for the POSIFLEX TK-3251 Paragon Series kiosk. It delivers a straightforward capacity increase for point-of-sale terminals running continuous workloads. The module uses major OEM chips from Samsung, Micron or Hynix for reliable operation.

Thermals and power draw

Operating at 1.20V, the unbuffered non-ECC module runs cool without a heat spreader. Standard DDR4 voltage keeps power draw low inside the compact kiosk chassis. Passive airflow in the POSIFLEX enclosure is sufficient for normal use.

Build integration

The 260-pin SODIMM fits the single memory slot in the TK-3251. CL22 latency at 3200MHz matches the system timing requirements. No ECC or registered buffering is needed for this platform. The upgrade frees the kiosk to handle larger transaction databases smoothly.

特長

  • 16 GB DDR4 3200 MHz module boosts POS kiosk responsiveness
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM fits POSIFLEX TK-3251 Paragon kiosks directly
  • 2Rx8 dual-rank layout maximises density in a single slot
  • Major-brand Samsung Micron Hynix chips ensure enterprise-grade reliability

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

How do I install the 260-Pin SODIMM in the POSIFLEX TK-3251 and what step is often missed?

Power off the kiosk, open the memory compartment, align the notch on the 260-Pin DDR4 SODIMM with the slot key, press firmly until the retention clips click, then verify 16GB appears in BIOS before reassembling.

What maintenance or replacement will this 16GB DDR4 3200 module need over its service life?

No scheduled maintenance is required; the unbuffered non-ECC SODIMM has no heat spreader or moving parts, so it runs until a rare cell failure triggers the lifetime replacement warranty.

What limit appears first when the POSIFLEX TK-3251 runs sustained workloads with this CL22 1.20V memory?

The CAS latency of 22 cycles at 3200 MT/s sets the timing ceiling; under continuous load the memory controller hits that latency bound before voltage or thermal limits become a factor.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。