暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, 260-pin SODIMM form factor, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM POSIFLEX EK-2430 memory upgrade

SKU CH-CJEH-PJW7F

A 16 GB DDR4 3200 SODIMM module with CL22 latency, 2Rx8 organisation and 1.2 V operation, built for POSIFLEX EK-2430 Mercury Series kiosks

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 3200 memory boosts POSIFLEX EK-2430 kiosk speed
  • CL22 1.20V timing keeps system stable under load
  • 2Rx8 260-pin SODIMM fits Mercury Series slot exactly
  • Major OEM Samsung Micron Hynix chips ensure reliable operation
  • Non-ECC unbuffered design matches factory specification precisely

POSIFLEX EK-2430 DDR4 SODIMM upgrade

This 16 GB DDR4 3200 module is built for the POSIFLEX EK-2430 Mercury Series kiosk. It uses a 260-pin SODIMM form factor with 2Rx8 organisation and runs at 1.2 V. The stick is non-ECC, unbuffered and carries a CL22 latency rating. It targets technicians who need a direct memory replacement for that specific point-of-sale platform.

Compatibility check before ordering

Verify that the target kiosk is the POSIFLEX EK-2430 Mercury Series and that its board accepts DDR4 3200 SODIMMs at 1.2 V. Confirm the slot count and maximum supported capacity per slot in the system manual. Ensure the BIOS is up to date and that the chassis can be opened for SODIMM access without voiding any service agreement. The module is not ECC and not registered, so the platform must support unbuffered memory.

Thermals noise and power draw

The module operates at the standard DDR4 voltage of 1.2 V and has no heat spreader, relying on chassis airflow for cooling. With no moving parts it produces no audible noise during operation. Power consumption stays within the normal range for a single 16 GB DDR4 SODIMM at this speed and latency. Typical workloads in a kiosk environment will not push the stick beyond its rated thermal envelope.

特長

  • 16GB DDR4 3200 memory boosts POSIFLEX EK-2430 kiosk speed
  • CL22 1.20V timing keeps system stable under load
  • 2Rx8 260-pin SODIMM fits Mercury Series slot exactly
  • Major OEM Samsung Micron Hynix chips ensure reliable operation
  • Non-ECC unbuffered design matches factory specification precisely

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

Does the package include anything besides the single 16 GB SODIMM module?

The box contains only the 16 GB DDR4 3200 CL22 260-pin SODIMM; no tools, cables or extra brackets are supplied.

Is the 16 GB CL22 2Rx8 stick the only capacity and latency option for the POSIFLEX EK-2430?

This listing offers the 16 GB CL22 2Rx8 configuration; other capacities or timings would be separate part numbers.

Will the 3200 MT/s rating run at full speed inside the EK-2430 kiosk?

The module is rated DDR4 3200 (PC4-25600) at 1.2 V; actual speed depends on the system's memory controller and BIOS settings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。