暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with black chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 262-PIN SODIMM memory upgrade for BIOSTAR EdgeComp MS-X7433RE

SKU CH-7QKK-67B7R

16 GB DDR5 SODIMM running at 4800 MHz with CL40 latency for the BIOSTAR EdgeComp MS-X7433RE industrial PC

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16GB DDR5 4800MHz boosts system responsiveness
  • CL40 latency at 1.1V balances speed and efficiency
  • 262-pin SODIMM fits BIOSTAR EdgeComp MS-X7433RE exactly
  • Single-rank 1Rx8 design enables straightforward upgrades
  • Major-brand Samsung, Micron or Hynix chips ensure reliability

NEMIX RAM 16GB DDR5 4800 SODIMM

This NEMIX RAM module delivers 16GB of DDR5 memory rated at 4800MHz with CL40 latency. It uses a 262-pin SODIMM form factor and operates at 1.1V. The kit is validated for the BIOSTAR EdgeComp MS-X7433RE industrial PC. It is built with major OEM chips from Samsung, Micron or Hynix in a 1Rx8 configuration.

Suits industrial PC upgrades needing validated

This memory targets technicians upgrading the specified BIOSTAR EdgeComp platform where DDR5 SODIMM support is confirmed. It is not for desktop DIMM slots, nor for systems requiring ECC or registered modules. Buyers needing higher capacity per slot or lower latency timings should look elsewhere.

Sustained load runs at 1.1V without a heat spreader

Under continuous workloads the module maintains its 4800MHz rating at the standard 1.1V. The absence of a heat spreader means thermal performance relies on chassis airflow. The 1Rx8 organisation keeps electrical loading light for stable operation in the validated industrial platform.

特長

  • 16GB DDR5 4800MHz boosts system responsiveness
  • CL40 latency at 1.1V balances speed and efficiency
  • 262-pin SODIMM fits BIOSTAR EdgeComp MS-X7433RE exactly
  • Single-rank 1Rx8 design enables straightforward upgrades
  • Major-brand Samsung, Micron or Hynix chips ensure reliability

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemBiostar
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1 x 16GB) DDR5 4800MHz PC5-38400 1Rx8 1.1V 262-PIN Non-ECC SODIMM

この商品に関する質問

Does the BIOSTAR EdgeComp MS-X7433RE need a free 262-pin SODIMM slot to accept this 16 GB module?

Yes — the MS-X7433RE uses 262-pin DDR5 SODIMM slots, so one must be vacant for the NEMIX RAM stick to install.

Will this 1.1 V DDR5 4800 CL40 SODIMM run alongside any existing DDR5 modules in the MS-X7433RE?

The system will operate all DDR5 memory at the lowest common speed and highest latency; mixing with slower or higher-latency DDR5 SODIMMs is possible but the whole array drops to the slowest timing.

After installation, how can I confirm the MS-X7433RE recognises the full 16 GB at 4800 MT/s CL40?

Open Task Manager → Performance → Memory or run CPU-Z; both show total capacity, speed (4800 MT/s) and CAS latency (CL40) for the new NEMIX RAM module.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。