暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR5 RDIMM module with black chips, no heat spreader, gold edge connector, 288 pins

NEMIX RAM

NEMIX RAM 16GB DDR5 6400MHz CL52 1.1V 1Rx8 ECC Registered RDIMM memory upgrade

SKU CH-1BZF-MQJTS

16GB DDR5 6400MHz ECC Registered RDIMM at 1.1V CL52, validated for Supermicro H13SRH motherboards

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Exact DDR5-6400 CL52 1.10V spec matches server memory controller for full-speed operation
  • 16GB 1Rx8 Registered ECC RDIMM corrects single-bit errors to prevent data corruption
  • 288-pin RDIMM form factor verified for Supermicro H13SRH motherboard compatibility
  • Registered architecture offloads controller enabling full-capacity operation across all populated slots
  • Lifetime replacement warranty with US-based technical support included

System-Specific DDR5 RDIMM

This NEMIX RAM module is a 16GB DDR5-6400 (PC5-51200) Registered ECC RDIMM built for servers that require exact-spec memory. It targets administrators upgrading or populating Supermicro H13SRH motherboards with validated, enterprise-grade DIMMs.

Registered ECC with 1Rx8 organisation

The single specification that decides fitment is the Registered (buffered) ECC architecture combined with a 1Rx8 rank structure at 1.1V and CL52 latency. This module matches the memory controller expectations of the qualified platform, allowing full-capacity recognition at rated speed without down-clocking or population errors.

288-pin DDR5 slot requirement

Installation requires an available 288-pin DDR5 RDIMM slot on a compatible Supermicro H13SRH motherboard following the board's specific population rules. The registered design offloads the memory controller to support fully populated configurations, while ECC corrects single-bit errors to prevent silent data corruption. Builders needing unbuffered UDIMMs, SODIMMs, or non-ECC memory for workstation or consumer platforms cannot use this module.

特長

  • Exact DDR5-6400 CL52 1.10V spec matches server memory controller for full-speed operation
  • 16GB 1Rx8 Registered ECC RDIMM corrects single-bit errors to prevent data corruption
  • 288-pin RDIMM form factor verified for Supermicro H13SRH motherboard compatibility
  • Registered architecture offloads controller enabling full-capacity operation across all populated slots
  • Lifetime replacement warranty with US-based technical support included

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

What does the 6400MHz rating mean once the module is installed in a server?

The module runs at DDR5-6400 speed with CL52 latency and 1.10V, so the memory controller recognises it at full capacity and operates at its rated frequency.

What does the PC5-51200 designation tell me about the interface and its practical limit?

PC5-51200 is the industry label for DDR5-6400 on a 288-pin RDIMM; the registered buffer lets every populated slot run at that speed without overloading the controller.

What physical slot and clearance does this 288-pin RDIMM need?

It fits a standard 288-pin DDR5 RDIMM slot and has no heat spreader, so it clears typical server heatsinks and chassis air-flow guides.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。