SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00498937BTC
在庫あり
NEMIX RAM
NEMIX RAM 192GB (6 x 32GB) DDR5 6400 CL52 2Rx8 1.1V ECC RDIMM memory upgrade for Supermicro H13DSG-OM
Six 32 GB DDR5 registered ECC modules totalling 192 GB at 6400 MT/s CL52 1.1 V, validated for the Supermicro H13DSG-OM motherboard
- Capacity192GB (6 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB total capacity from six 32 GB modules
- DDR5 6400 speed with CL52 latency for rated performance
- Registered ECC design corrects single-bit errors automatically
- 1 V operation matches the server memory controller spec
- 288-pin RDIMM form factor fits the Supermicro H13DSG-OM motherboard
192GB DDR5-6400 ECC RDIMM kit
This 192GB kit contains six 32GB DDR5-6400 Registered ECC RDIMMs built for the Supermicro H13DSG-OM motherboard. The modules run at 1.1V with CL52 latency and a 2Rx8 organization. Registered buffering and on-die ECC protect data integrity in fully populated server configurations.
Fitment and capacity limits
Suitable for administrators upgrading the named Supermicro board to its maximum supported density with matched modules. Builders needing unbuffered UDIMMs, SODIMMs, non-ECC memory, or a different voltage or pin count should select a different kit.
288-pin Registered DDR5 form factor
The 288-pin RDIMM form factor is the sole physical and electrical interface this motherboard accepts. Only modules matching this exact registered DDR5 specification will seat correctly and be recognised at full capacity.
特長
- 192 GB total capacity from six 32 GB modules
- DDR5 6400 speed with CL52 latency for rated performance
- Registered ECC design corrects single-bit errors automatically
- 1 V operation matches the server memory controller spec
- 288-pin RDIMM form factor fits the Supermicro H13DSG-OM motherboard
仕様
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K6 |
| Capacity | 192GB (6 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 6X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
この商品に関する質問
Does my Supermicro H13DSG-OM need a specific BIOS revision to run this DDR5 6400 kit at full speed?
The kit is spec-matched to the board's memory-population rules; consult your motherboard manual for supported capacities, approved DIMM order, and any required BIOS update before installation.
Can I mix these 2Rx8 Registered ECC modules with older DDR5 UDIMMs already installed?
No, the H13DSG-OM requires 288-pin Registered RDIMMs; UDIMMs are a different form factor and will not work in the same system.
How do I confirm the full 192 GB is recognised and running at 6400 MT/s after installation?
Check the POST memory summary or BIOS setup screen for 192 GB total, DDR5 6400 speed, CL52 timings, and 1.1 V operation.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
