暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 5600 ECC RDIMM for Dell PowerEdge XE9685L

SKU CH-NCYB-C3F67

A 256GB DDR5 registered ECC kit with two 128GB modules running at 5600MHz and CL46 latency for Dell PowerEdge XE9685L servers

  • Capacity256GB (2 x 128GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Size 256GB 2X128GB

他に 6点の構成を表示

Speed 5600MHz

  • 256 GB kit doubles server capacity with two 128 GB modules
  • DDR5 5600 speed feeds data to Dell PowerEdge XE9685L processors
  • ECC registered design corrects errors for uninterrupted workloads
  • 1 V operation reduces power draw per module
  • 4Rx4 288-pin layout fits qualified memory slots

Capacity and Compatibility

This NEMIX RAM kit delivers 256GB of DDR5 ECC registered memory in a two-module configuration of 128GB each. It is built for the Dell PowerEdge XE9685L rack server and operates at 5600MHz with a CAS latency of 46. The modules run at 1.1V and use a 288-pin RDIMM form factor with 4Rx4 organisation.

Suited Workloads and Limits

This memory suits environments that require error-correcting registered DIMMs at the specified density and speed. It will not fit systems that need unbuffered modules, non-ECC memory or a different DDR generation. Buyers who need lower capacity kits, different rank configurations or modules with heat spreaders should look at other options.

Sustained Operation

The registered design and ECC function maintain data integrity during continuous server workloads. Operating at the standard 1.1V DDR5 voltage helps keep power draw consistent under load. Without a heat spreader, thermal performance depends on the chassis airflow provisioned by the Dell PowerEdge XE9685L platform.

特長

  • 256 GB kit doubles server capacity with two 128 GB modules
  • DDR5 5600 speed feeds data to Dell PowerEdge XE9685L processors
  • ECC registered design corrects errors for uninterrupted workloads
  • 1 V operation reduces power draw per module
  • 4Rx4 288-pin layout fits qualified memory slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-744K2
Capacity256GB (2 x 128GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB (2 x 128GB) DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the Dell PowerEdge XE9685L need a specific BIOS version to recognise the 4Rx4 organisation of these modules?

The kit is built to Dell specifications for the XE9685L, so the 4Rx4 layout is supported by the platform's qualified memory list.

Can I keep my existing DDR5 4800 RDIMMs installed together with these 5600 CL46 modules?

The server will clock all channels to the lowest common speed; mixing 4800 and 5600 modules will run everything at 4800.

How do I confirm the kit is running at 5600 MT/s with ECC active after installation?

Check the POST memory summary or the iDRAC inventory — both will show 5600 MT/s, 1.1 V, CL46 and ECC enabled.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。