暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 5600MHz ECC Registered RDIMM Supermicro H13SST-GC memory upgrade

SKU CH-WZVH-15Z5K

256 GB kit of two 128 GB DDR5 5600 MHz ECC registered RDIMMs with CL46 latency and 1.1 V operation for Supermicro H13SST-GC motherboards

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity for memory-intensive server workloads using two 128 GB modules
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the Supermicro H13SST-GC
  • Registered ECC RDIMM architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operating voltage matches the board's memory controller specification exactly
  • 288-pin 2Rx4 RDIMM form factor fits the required slots without adaptation

Supermicro H13SST-GC memory kit

This 256 GB kit contains two 128 GB DDR5 RDIMM modules built for the Supermicro H13SST-GC motherboard. Each module runs at 5600 MHz with CL46 latency at 1.10 V. Registered ECC design meets the board's requirement for buffered memory in every populated slot.

Capacity and headroom

Two 128 GB modules give 256 GB total across two slots, using a 2Rx4 organisation that the memory controller recognises at full capacity. Registered buffering keeps signal integrity stable when all supported slots are filled. The kit will not fit boards that require UDIMM or SODIMM form factors.

Build and connectors

Modules use the 288-pin DDR5 RDIMM interface with no heat spreader, relying on server chassis airflow for cooling. Major OEM chips from Samsung, Micron or Hynix provide enterprise-grade stability. ECC corrects single-bit errors on the fly to prevent silent data corruption.

特長

  • 256 GB total capacity for memory-intensive server workloads using two 128 GB modules
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the Supermicro H13SST-GC
  • Registered ECC RDIMM architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operating voltage matches the board's memory controller specification exactly
  • 288-pin 2Rx4 RDIMM form factor fits the required slots without adaptation

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 256GB DDR5-5600 RDIMM kit work alongside existing 128GB modules already installed in my Supermicro H13SST-GC?

The kit uses 2Rx4 rank organisation, 1.10 V and CL46 timing. Matching those specifications with any modules already in the system is required for stable operation at the rated 5600 MT/s speed.

How can I verify the memory is running at DDR5-5600 with ECC active after installation?

Enter the BIOS or use a hardware-information utility and confirm the memory frequency reads 5600 MT/s, the voltage shows 1.10 V and the ECC status reports enabled or active.

What exactly ships in the box and is anything else needed to install it?

The package contains two 128 GB 288-pin DDR5 RDIMM modules. No heat spreaders, cables or additional components are included; the motherboard provides the required slots and power.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。