暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 256GB kit

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 6400 CL52 4Rx4 ECC RDIMM Supermicro X14SDW-40C-SP9F memory upgrade

SKU CH-VPMP-Z4D3Y

A 256 GB DDR5 registered ECC memory kit (2 × 128 GB) running at 6400 MT/s with CL52 latency and 1.1 V, validated for the Supermicro X14SDW-40C-SP9F motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

  • 256 GB kit (2 × 128 GB) delivers full DDR5 6400 speed
  • CL52 latency at 1.10 V ensures rated throughput on every slot
  • 4Rx4 registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 288-pin RDIMM form factor matches Supermicro X14SDW-40C-SP9F population rules exactly
  • Lifetime replacement warranty with free US-based technical support included

Exact-match server upgrade

This 256GB kit comprises two 128GB DDR5 6400 RDIMMs built for the Supermicro X14SDW-40C-SP9F motherboard. Registered ECC architecture and 4Rx4 organisation match the board's memory-controller expectations so the full capacity is recognised at rated speed.

Capacity and headroom

Two 128GB modules deliver 256GB of registered ECC memory, allowing every supported slot to run fully populated while correcting single-bit errors on the fly. Systems that require more than 256GB or need unbuffered UDIMMs cannot use this kit.

DDR5 6400 CL52 1.1V spec

The modules operate at DDR5 6400 (PC5-51200) with CL52 latency at 1.1V, the precise timing and voltage the X14SDW-40C-SP9F memory controller requires for stable operation at full population.

特長

  • 256 GB kit (2 × 128 GB) delivers full DDR5 6400 speed
  • CL52 latency at 1.10 V ensures rated throughput on every slot
  • 4Rx4 registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 288-pin RDIMM form factor matches Supermicro X14SDW-40C-SP9F population rules exactly
  • Lifetime replacement warranty with free US-based technical support included

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this DDR5 6400 kit run with my existing Supermicro X14SDW-40C-SP9F modules?

The kit is spec-matched to the X14SDW-40C-SP9F at DDR5 6400, CL52, 1.1V, 4Rx4 registered ECC. Populate remaining slots following the board's population rules so all channels run at the rated speed.

How can I confirm the kit is running at DDR5 6400 CL52 after install?

Check the BIOS memory info or OS tools such as dmidecode; they should show 6400 MT/s, CAS 52, 1.1 V and registered ECC status for both 128 GB modules.

What comes in the box and what else do I need?

The box contains the 256 GB (2×128 GB) DDR5 6400 CL52 4Rx4 ECC RDIMM kit only. No extra cables, brackets or software are required for installation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。