暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 256GB 4x64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V CL52 288-Pin ECC RDIMM Kit Supermicro X14SRA-F

SKU CH-CM4Y-1JZYC

256 GB kit of four 64 GB DDR5-6400 registered ECC RDIMMs at CL52 and 1.1 V, validated for the Supermicro X14SRA-F motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from four 64 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth for demanding workloads
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the platform's native voltage for reliable initialisation
  • 288-pin RDIMM form factor verified for Supermicro X14SRA-F motherboard compatibility

Exact-Match Kit for Supermicro X14SRA-F

This 256GB kit contains four 64GB DDR5 6400MHz Registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro X14SRA-F memory controller expects. It installs as a matched set so the server recognises the full capacity at rated speed.

Registered 4Rx4 Architecture

Each module uses a 4Rx4 organisation with Registered buffering and ECC, operating at 1.1V CL52. The Registered design offloads the memory controller to keep every slot stable when fully populated, while ECC corrects single-bit errors before they affect production workloads.

Suited for X14SRA-F builds needing maximum capacity

Ideal for administrators populating the Supermicro X14SRA-F to its supported limit with validated DDR5 RDIMMs. Not for systems that require UDIMM or SODIMM form factors, non-ECC memory, lower voltages, or different DDR generations.

特長

  • 256 GB total capacity from four 64 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth for demanding workloads
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the platform's native voltage for reliable initialisation
  • 288-pin RDIMM form factor verified for Supermicro X14SRA-F motherboard compatibility

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-944K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does DDR5 6400 CL52 mean for throughput and latency on the Supermicro X14SRA-F?

The kit runs at 6400 MT/s with a CL52 timing at 1.1 V, so the memory controller sees its rated speed and latency without manual tuning.

How does the PC5-51200 rating relate to the 288-pin DDR5 RDIMM slot on this board?

PC5-51200 is the JEDEC bandwidth designation for DDR5-6400; the 288-pin registered DIMM keying matches the X14SRA-F slots exactly.

Will four 64 GB 4Rx4 registered DIMMs fit the X14SRA-F memory population rules?

The kit provides four 288-pin RDIMMs built to the board's required rank, voltage and timing, so it installs in the supported full-population order.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。