NEMIX RAM
NEMIX RAM 256GB (8x32GB) DDR4 3200 ECC RDIMM CL22 for THINKMATE VSX-R5-760S1 VSX-R5-540RTP memory upgrade
256 GB DDR4 3200 ECC registered server memory kit with eight 32 GB modules for Thinkmate VSX-R5-760S1 and VSX-R5-540RTP workstations
- Capacity256GB (8 x 32GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 256GB total capacity across eight 32GB modules for large workloads
- DDR4 3200 speed with CL22 latency for responsive server operation
- ECC registered design detects and corrects single-bit errors automatically
- 2V low-voltage modules reduce power draw in dense configurations
- Validated for Thinkmate VSX-R5-760S1 and VSX-R5-540RTP workstations
256GB DDR4 ECC RDIMM kit
This 256GB kit supplies eight 32GB registered DIMMs built for THINKMATE VSX-R5-760S1 and VSX-R5-540RTP workstations. Each module runs at DDR4 3200 with CL22 latency and 1.20V operation. The registered design adds a buffer that reduces electrical load on the memory controller. It targets administrators who need maximum capacity in those specific platforms.
Sustained-load behaviour with registered ECC
Error-correcting code detects and corrects single-bit errors during continuous operation. The registered buffer stabilises signalling when all eight slots are populated. Modules use major OEM chips from Samsung, Micron or Hynix and are stress tested under load before shipping. This combination helps maintain data integrity during long compute jobs or virtualisation workloads.
DDR4 3200 interface limits
The PC4-25600 standard caps transfer rate at 3200 MT/s per pin across the 288-pin interface. Registered DIMMs add one clock cycle of buffering, which slightly increases latency versus unbuffered modules. Maximum capacity per module is 32GB with 2Rx8 organisation. Systems requiring higher bandwidth or greater per-slot density must move to a newer memory generation.
特長
- 256GB total capacity across eight 32GB modules for large workloads
- DDR4 3200 speed with CL22 latency for responsive server operation
- ECC registered design detects and corrects single-bit errors automatically
- 2V low-voltage modules reduce power draw in dense configurations
- Validated for Thinkmate VSX-R5-760S1 and VSX-R5-540RTP workstations
仕様
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-328K8 |
| Capacity | 256GB (8 x 32GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (8X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
この商品に関する質問
Does the 1.2 V operating voltage keep heat and power draw low when all eight modules run continuously?
Yes, each 32 GB module runs at 1.20 V, so the full 256 GB kit draws minimal power and generates little heat even under sustained server workloads.
What must the ThinkMate VSX-R5-760S1 or VSX-R5-540RTP already provide for these 288-pin ECC RDIMMs to function?
The workstation needs DDR4 RDIMM slots that support registered ECC memory at 3200 MT/s and a memory controller able to address 2Rx8 modules across all eight channels.
Will the CL22 registered DIMMs work alongside any older DDR4 ECC RDIMMs I keep in the same ThinkMate system?
They can coexist if the older modules are also DDR4 registered ECC at 3200 MT/s; the system will run all sticks at the lowest common speed and latency.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。



