暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green SODIMM modules, black chips, gold edge connectors

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 260-Pin SODIMM Kit for POSIFLEX ZT-3115E

SKU CH-JJBV-XH8YS

32 GB kit of two 16 GB DDR4 3200 CL22 SODIMM modules built for the POSIFLEX ZT-3115E terminal

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32GB kit expands POS terminal capacity for heavy workloads
  • DDR4 3200 speed matches POSIFLEX ZT-3115E spec for stable operation
  • CL22 latency with 1.2V voltage keeps power draw low
  • 2Rx8 dual-rank modules utilise Samsung Micron Hynix chips for reliability
  • 260-pin SODIMM form factor fits directly into Haydn ZT series slot

Designed for POSIFLEX ZT-3115E terminals

This 32GB kit contains two 16GB DDR4 SODIMM modules built for the POSIFLEX ZT-3115E Haydn ZT series point-of-sale terminal. Each module runs at 3200MHz with a CL22 latency and operates at 1.20V. The 260-pin unbuffered non-ECC design matches the system's memory controller exactly.

Suits technicians upgrading a single ZT-3115E unit

Installers who need a validated, plug-compatible memory upgrade for this specific POS terminal can use this kit. It is not for desktop PCs that require 288-pin DIMMs, nor for laptops or servers that demand ECC or registered modules. Builders working on any other platform should verify their exact part number before purchasing.

The 2Rx8 rank configuration decides fit

The modules use a 2Rx8 organisation (part number MS25600-628K2) with Samsung, Micron or Hynix chips. If the POSIFLEX service manual specifies a different rank structure, the system may not recognise the full 32GB capacity. Confirm the 2Rx8 requirement in your hardware documentation before ordering.

特長

  • 32GB kit expands POS terminal capacity for heavy workloads
  • DDR4 3200 speed matches POSIFLEX ZT-3115E spec for stable operation
  • CL22 latency with 1.2V voltage keeps power draw low
  • 2Rx8 dual-rank modules utilise Samsung Micron Hynix chips for reliability
  • 260-pin SODIMM form factor fits directly into Haydn ZT series slot

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT

この商品に関する質問

Should I choose the 2x16GB kit or look for a single 32GB module for the POSIFLEX ZT-3115E?

The 2x16GB kit enables dual-channel operation on the POSIFLEX ZT-3115E, doubling memory bandwidth compared to a single module of the same total capacity.

What does the 3200MHz rating actually deliver once installed in the POS terminal?

The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.20V, providing the maximum standard throughput the ZT-3115E memory controller supports.

Does the 260-pin SODIMM interface limit speed or capacity on this system?

The 260-pin DDR4 SODIMM form factor is the native interface for the POSIFLEX ZT-3115E and imposes no additional limits beyond the 3200MHz CL22 specification of this kit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。