暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green 260-pin DDR4 SODIMM sticks, 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 2Rx8 1.2V 260-Pin SODIMM for POSIFLEX ZT-3716E

SKU CH-K3CG-GWH1Z

A 32 GB kit of two 16 GB DDR4 3200 CL22 SODIMM modules at 1.2 V for the POSIFLEX ZT-3716E terminal

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit boosts POS terminal responsiveness
  • DDR4 3200 speed matches POSIFLEX ZT-3716E requirements
  • CL22 latency supports stable transaction processing
  • 2 V operation reduces power draw in kiosk environments
  • 2Rx8 dual-rank modules maximise memory density per slot

POSIFLEX ZT-3716E memory kit

This 32 GB kit contains two 16 GB DDR4 SODIMM modules built for the POSIFLEX ZT-3716E terminal. Each stick runs at 3200 MHz with CL22 latency at 1.2 V and uses a 2Rx8 unbuffered non-ECC layout. The 260-pin form factor matches the slot specification for the Haydn ZT series point-of-sale platform.

Sustained workload behaviour

Modules are stress tested under load before shipping to verify stability during continuous operation. The 1.2 V operating voltage keeps power draw predictable for long shifts in retail or kiosk environments. Unbuffered non-ECC design means data flows directly without register delay, supporting steady throughput for transaction processing.

Upgrade scope and limits

This kit replaces lower-capacity DDR4 SODIMM pairs in the ZT-3716E to reach the 32 GB maximum supported by the platform. The jump is worthwhile when the terminal runs multiple applications or large databases that exceed the original memory. Buyers needing ECC error correction or registered modules for server-grade platforms cannot use this kit.

特長

  • 32 GB kit boosts POS terminal responsiveness
  • DDR4 3200 speed matches POSIFLEX ZT-3716E requirements
  • CL22 latency supports stable transaction processing
  • 2 V operation reduces power draw in kiosk environments
  • 2Rx8 dual-rank modules maximise memory density per slot

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT

この商品に関する質問

Does the 1.2 V operating voltage of these modules mean they run cooler during continuous POS operation?

The 1.2 V standard voltage keeps power draw low, which helps limit heat output during all-day use in the terminal.

Will the POSIFLEX ZT-3716E accept this 260-pin SODIMM kit without any other parts?

Yes, the kit is built for that exact model and plugs directly into its memory slots with no extra components required.

Can this DDR4 3200 CL22 kit be mixed with existing DDR4 modules already installed in the terminal?

Mixing is possible if the other modules are also DDR4 SODIMMs, though the system will run all memory at the speed of the slowest stick.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。