暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 ECC Unbuffered UDIMM memory upgrade

SKU CH-Y8D0-7YSM0

32 GB DDR4 3200 ECC unbuffered UDIMM kit (2 × 16 GB, CL22, 1.2 V) for compatible Supermicro systems

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection guards data integrity in servers
  • 32 GB kit (2 × 16 GB) expands memory capacity
  • DDR4 3200 speed with CL22 latency
  • 2 V low-voltage operation reduces power draw
  • Validated for SuperMicro X12SAE-5, X12SCA-5F, X12STD-F, X12STE-F, X12STH-F, X12STH-LN4F, X12STH-SYS

32 GB DDR4 ECC UDIMM kit

This 32 GB kit contains two 16 GB DDR4 3200 CL22 ECC unbuffered UDIMM modules. It is built for Supermicro X12 series server and workstation boards that accept 288-pin DDR4 ECC memory. The modules run at 1.2 V and use 2Rx8 organisation with major-brand DRAM chips.

Compatibility and use cases

Suitable for administrators upgrading supported Supermicro platforms that require DDR4 ECC unbuffered memory. Not suited for systems that need registered or load-reduced DIMMs, for boards limited to lower speeds, or for any platform that does not accept 288-pin DDR4 ECC UDIMMs.

Deciding specification: DDR4 3200 CL22 ECC

The memory operates at DDR4 3200 with CL22 latency and ECC error correction in an unbuffered layout. This combination determines whether the kit will post and run stably in the target Supermicro motherboards; verify the board's qualified-vendor list before purchase.

特長

  • ECC protection guards data integrity in servers
  • 32 GB kit (2 × 16 GB) expands memory capacity
  • DDR4 3200 speed with CL22 latency
  • 2 V low-voltage operation reduces power draw
  • Validated for SuperMicro X12SAE-5, X12SCA-5F, X12STD-F, X12STE-F, X12STH-F, X12STH-LN4F, X12STH-SYS

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

この商品に関する質問

Which Supermicro motherboards must I already have for this 288-pin DDR4 ECC UDIMM kit to be supported?

The kit is validated for Supermicro X12SAE-5, X12SCA-5F, X12STD-F, X12STE-F, X12STH-F, X12STH-LN4F and X12STH-SYS boards.

Will the 3200 MHz CL22 modules run stably beside older DDR4 sticks I keep in the same server?

Mixing speeds or latencies forces all channels to the slowest common timing; for best stability populate every slot with identical 3200 CL22 modules.

How can I confirm the 32 GB kit is operating at 3200 MT/s with ECC active after installation?

Check the BIOS memory information screen — it should report 3200 MT/s, CL22 timings, 1.20 V and ECC enabled for each 16 GB module.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。