暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 32GB 2x16GB DDR5 6400MHz CL52 1.1V ECC RDIMM memory upgrade

SKU CH-CTYM-P9PHT

32 GB dual-channel DDR5 ECC registered memory kit running at 6400 MHz CL52 and 1.1 V for the Supermicro H14SSL-N motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

他に 24点の構成を表示
  • 32 GB DDR5 capacity for demanding server workloads
  • Registered ECC design corrects single-bit errors on the fly
  • CL52 latency at 6400 MT/s delivers rated throughput
  • 1 V operation reduces power draw per module
  • Exact match for Supermicro H14SSL-N 288-pin RDIMM slots

Exact-Match DDR5-6400 RDIMM Kit

This NEMIX RAM kit delivers 32 GB across two 16 GB DDR5 Registered DIMMs rated at 6400 MHz with CL52 latency and 1.10 V operation. The modules use a 1Rx8 layout and 288-pin RDIMM form factor with on-die ECC for single-bit error correction. They are validated for the Supermicro H14SSL-N motherboard so the memory controller recognises the full capacity at the rated speed.

Built for Supermicro H14SSL-N Servers

The kit suits administrators expanding or repairing a Supermicro H14SSL-N platform that requires Registered ECC DDR5 memory in a 288-pin slot. Builders needing unbuffered UDIMMs, SODIMMs, non-ECC modules or a different speed grade should look elsewhere because this product is a registered RDIMM with a fixed 6400 MHz spec.

Drop-In Registered ECC Upgrade

Each module plugs directly into the board's DDR5 RDIMM slots and the registered architecture reduces electrical load on the memory controller when all slots are populated. ECC corrects single-bit errors in real time to protect data integrity. No heat spreader is fitted so airflow clearance follows the motherboard's standard DIMM spacing requirements.

特長

  • 32 GB DDR5 capacity for demanding server workloads
  • Registered ECC design corrects single-bit errors on the fly
  • CL52 latency at 6400 MT/s delivers rated throughput
  • 1 V operation reduces power draw per module
  • Exact match for Supermicro H14SSL-N 288-pin RDIMM slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does my Supermicro H14SSL-N motherboard need a specific DIMM population order for these 288-pin RDIMMs?

The motherboard manual defines the approved DIMM population order and supported capacities; consult it before installing the 2 x 16GB kit to ensure full 32GB recognition at DDR5 6400.

Can I mix this DDR5 6400 kit with older DDR5 modules already in the server?

Mixing speeds, ranks or voltages can force the memory controller to downclock or disable ECC; for stable operation populate all channels with identical 1Rx8 1.1V CL52 modules.

How do I confirm the kit is running at DDR5 6400 with ECC active after installation?

Check the BIOS memory information screen — it should report 32GB total, 6400 MT/s, CL52, 1.1V and ECC enabled for each DIMM.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。