暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 32GB 4x8GB DDR5 5600 CL46 1.1V UDIMM Supermicro X14SAE-F memory upgrade

SKU CH-K9X1-QXWMP

32 GB kit of four 8 GB DDR5-5600 CL46 unbuffered UDIMMs at 1.1 V, validated for the Supermicro X14SAE-F motherboard

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • 32 GB total capacity from four 8 GB modules for expanded multitasking headroom
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth out of the box
  • 1 V operation matches the platform spec for stable, low-power running
  • 288-pin UDIMM form factor fits the Supermicro X14SAE-F motherboard exactly
  • Built with major OEM chips and tested at rated speed for reliable operation

Exact-match DDR5 kit for Supermicro X14SAE-F

This 32GB kit contains four 8GB DDR5 5600 UDIMM modules built to the board's native specification. Non-ECC unbuffered DIMMs with a 1Rx8 layout and 1.10V operation are recognised immediately by the memory controller. Major OEM chips from Samsung, Micron or Hynix provide tested stability at rated speed and timings.

32GB capacity with CL46 latency at DDR5 5600

The kit delivers 32GB across four slots, giving headroom for multi-tasking workloads and typical desktop applications. CL46 timing at 5600 MT/s matches the platform's validated profile, so the system boots at full frequency without manual adjustment. Performance scales until the board's maximum supported population or memory-controller limits are reached.

Upgrade from lower-capacity or slower DDR5 modules

Replacing a partial kit or slower-speed DDR5 with this 4x8GB set restores full-channel bandwidth and eliminates mixed-timing penalties. The jump is worthwhile when the current configuration leaves slots empty, runs below 5600 MT/s, or uses mismatched ranks that force the controller to downclock. Builders needing ECC, registered DIMMs or capacities beyond 32GB per kit must select a different product class.

特長

  • 32 GB total capacity from four 8 GB modules for expanded multitasking headroom
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth out of the box
  • 1 V operation matches the platform spec for stable, low-power running
  • 288-pin UDIMM form factor fits the Supermicro X14SAE-F motherboard exactly
  • Built with major OEM chips and tested at rated speed for reliable operation

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 4×8 GB DDR5 5600 kit run at its rated speed alongside older DDR5 modules I already have?

Mixing modules with different speeds, timings or ranks can force the memory controller to downclock all sticks to the slowest common settings; for guaranteed DDR5 5600 CL46 operation at 1.1 V, populate all four slots with this matched kit.

How can I verify the kit is running at DDR5 5600 CL46 after installation?

Enter the system BIOS or use a tool such as CPU-Z and confirm the memory frequency reads 5600 MT/s with CAS latency 46 at 1.1 V across all four DIMMs.

Does the package include only the four UDIMMs or are extra accessories supplied?

The box contains the 32 GB kit — four 8 GB 288-pin DDR5 UDIMMs — and nothing else; no heat spreaders, cables or tools are included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。