暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 UDIMM modules without heat spreaders in a kit

NEMIX RAM

NEMIX RAM 32GB 4x8GB DDR5 5600 PC5-44800 CL46 1.1V 1Rx8 UDIMM Supermicro X14SAE memory upgrade

SKU CH-V5XG-KMKFH

32 GB DDR5 kit with four 8 GB UDIMMs at 5600 MHz, CL46 and 1.1 V for Supermicro X14SAE motherboards

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 4X8GB

  • 32 GB kit gives your Supermicro X14SAE full rated capacity
  • DDR5-5600 CL46 runs at the board's native speed without manual tuning
  • 1 V 1Rx8 unbuffered UDIMM matches the controller's exact voltage and rank requirements
  • 288-pin non-ECC modules fit the desktop DIMM slots the motherboard provides
  • Major OEM Samsung, Micron or Hynix chips tested for stability at rated specifications

32 GB DDR5 kit for Supermicro X14SAE

This 32 GB kit contains four 8 GB DDR5 UDIMM modules rated at 5600 MT/s with CL46 timing at 1.1 V. It is built as a direct upgrade for the Supermicro X14SAE motherboard using the 288-pin unbuffered non-ECC layout that board requires.

Verified fitment and OEM components

Modules use major OEM chips from Samsung, Micron or Hynix and are tested at the rated speed, voltage and latency for stable operation. The 1Rx8 rank structure matches the memory controller expectations so the full capacity is recognised without manual configuration.

Lifetime support and pre-purchase check

The kit ships as a matched set of four modules with no heat spreaders included. Buyers who need ECC registered DIMMs or SODIMM form factors should select a different product. Consult the motherboard manual for approved population order before installation.

特長

  • 32 GB kit gives your Supermicro X14SAE full rated capacity
  • DDR5-5600 CL46 runs at the board's native speed without manual tuning
  • 1 V 1Rx8 unbuffered UDIMM matches the controller's exact voltage and rank requirements
  • 288-pin non-ECC modules fit the desktop DIMM slots the motherboard provides
  • Major OEM Samsung, Micron or Hynix chips tested for stability at rated specifications

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will DDR5 5600 PC5-44800 run at its rated speed on the Supermicro X14SAE?

The kit is spec-matched to the board's DDR5 5600 controller, so the memory controller recognises the 1Rx8 rank, 1.10 V voltage and CL46 timing and runs the modules at the rated 5600 MT/s without manual tuning.

Does the 288-pin UDIMM form factor fit the Supermicro X14SAE DIMM slots?

Yes, the board requires 288-pin unbuffered UDIMMs and this kit uses exactly that form factor; no ECC or registered modules are needed, so the sticks seat directly in the standard desktop DIMM slots.

What is the correct population order for the four 8 GB modules on the X14SAE?

Consult the motherboard manual for the approved DIMM population sequence; the manufacturer highlights that supported capacities and slot order vary by model, so follow the board-specific guide to ensure all 32 GB are recognised.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。