暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green bare circuit board DDR4 UDIMM module 288 pins 32GB 2933MHz CL21 1.2V

NEMIX RAM

NEMIX RAM 32GB DDR4 2933MHz CL21 1.2V 2Rx8 UDIMM memory upgrade

SKU CH-DN2C-7KB5G

32 GB DDR4 module running at 2933 MHz with CL21 latency and 1.2 V for Supermicro systems

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB capacity lets you run large workloads without swapping
  • DDR4 2933 MT/s speed feeds data to the CPU faster
  • CL21 latency keeps response times tight under load
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits standard desktop DIMM slots

SuperMicro compatible DDR4 UDIMM

This 32 GB DDR4 module runs at 2933 MHz with CL21 latency and 1.20 V operation. It is built as a single 2Rx8 rank UDIMM using 288-pin packaging for SuperMicro desktop and workstation boards. The non-ECC unbuffered design targets system integrators and IT professionals who need validated compatibility for SuperMicro platforms.

Sustained workload behaviour

Modules are rigorously stress tested under load to ensure reliability during extended compute tasks. The 2Rx8 organisation and major OEM chipsets from Samsung, Micron or Hynix support steady data throughput without ECC overhead. CL21 timing at 2933 MHz provides consistent latency for memory-bound workloads on supported SuperMicro motherboards.

Thermals noise and power

Operating at 1.20 V keeps power draw low for a 32 GB density module. No heat spreader is fitted, so airflow across the bare PCB manages thermals in typical chassis configurations. The unbuffered design adds no active components, resulting in silent operation with no additional fan noise beyond system cooling.

特長

  • 32 GB capacity lets you run large workloads without swapping
  • DDR4 2933 MT/s speed feeds data to the CPU faster
  • CL21 latency keeps response times tight under load
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits standard desktop DIMM slots

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-328K1
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM

この商品に関する質問

Will this 32GB DDR4 2933MHz CL21 module run hotter or draw more power than standard 1.2V sticks in a system running all day?

The module operates at the standard DDR4 voltage of 1.20V, so its power draw and heat output match typical unbuffered UDIMMs at this speed.

What motherboard slot and memory controller features must my system already provide for this 288-pin UDIMM to function?

Your board needs a DDR4 UDIMM slot with a 288-pin interface and a memory controller that supports non-ECC, unbuffered modules at 2933MHz.

If I keep my current Supermicro C9X299-PGF motherboard, will this 2Rx8 rank configuration work without changes?

This kit is validated for the Supermicro MBD-C9X299-PGF, so the 2Rx8 organisation is natively supported by that platform.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。