暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips and gold contacts along the bottom edge

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 PC5-38400 CL40 1Rx4 1.10V 288-pin ECC RDIMM memory upgrade

SKU CH-XA81-HGAF7

32 GB DDR5-4800 ECC registered DIMM with CL40 latency and 1.1 V operation for compatible Hynix server platforms

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB DDR5 capacity for high-density server workloads
  • ECC registered design protects data integrity in critical systems
  • 4800 MT/s speed with CL40 latency for responsive throughput
  • 1 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits compatible DDR5 server boards

32 GB DDR5 ECC RDIMM for server workloads

This 32 GB DDR5 module operates at 4800 MT/s with CL40 latency and 1.10 V power. It uses a 1Rx4 registered design with on-die ECC for data integrity. The 288-pin RDIMM form factor fits compatible server and workstation platforms.

Registered buffer eases electrical load

Registered signalling reduces the drive burden on the host controller, allowing larger memory populations per channel. The single-rank layout keeps timing margins predictable. No heat spreader is fitted, so airflow across the PCB must be provided by the system chassis.

32 GB capacity suits virtualization

The module handles multi-VM hosts, in-memory databases and compute nodes with headroom for typical working sets. Workloads that exceed 32 GB per channel will require additional DIMM slots or higher-density modules. Non-ECC consumer platforms cannot use this registered ECC memory.

特長

  • 32 GB DDR5 capacity for high-density server workloads
  • ECC registered design protects data integrity in critical systems
  • 4800 MT/s speed with CL40 latency for responsive throughput
  • 1 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits compatible DDR5 server boards

仕様

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K1
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemHynix
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

この商品に関する質問

Will the 1.10V operating voltage limit sustained throughput in a 4800 MT/s DDR5 RDIMM?

The module runs at the standard 1.10V for DDR5 4800, so voltage is not a bottleneck; sustained throughput is governed by the CL40 latency and the memory controller.

Does the registered ECC design add noticeable heat or fan noise during continuous operation?

Registered modules include a register that draws a small amount of extra power, but at 1.10V and without a heat spreader the thermal load remains low in typical server airflow.

Must the motherboard already support DDR5 RDIMM ECC at 4800 MT/s for this module to function?

Yes, the system needs a DDR5 RDIMM slot, registered ECC support and a BIOS that enables 4800 MT/s operation for the module to be recognised.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。