暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips no heat spreader 288 pin DDR5 UDIMM

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz ECC UDIMM CL46 2Rx8 1.1V memory upgrade

SKU CH-4BS7-QHGK3

32 GB DDR5 ECC UDIMM running at 5600 MHz with CL46 latency and 1.1 V for Supermicro X13SAW-F motherboards

  • Capacity32GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB

  • 32 GB DDR5 5600 MHz capacity for high-throughput workloads
  • ECC error correction prevents silent data corruption and crashes
  • 2Rx8 unbuffered UDIMM matches Supermicro X13SAW-F slot requirements
  • 1 V operation at CL46 latency runs at rated speed
  • 288-pin DDR5 form factor ensures physical and electrical compatibility

Exact DDR5 ECC UDIMM upgrade

This 32GB DDR5 5600MHz PC5-44800 module is an unbuffered ECC UDIMM built to the precise 2Rx8 rank, 1.1V voltage and CL46 timing the Supermicro X13SAW-F memory controller expects. It installs as a single 288-pin DIMM so the board recognises the full capacity at its rated speed without configuration changes.

Thermals power and noise

The module has no heat spreader and operates at the standard 1.1V DDR5 voltage, so it adds minimal thermal load inside a server chassis. As a passive component it produces no acoustic noise and draws only the power required for the 5600MT/s data rate and ECC operation.

ECC UDIMM form factor constraint

This part is a 288-pin unbuffered ECC UDIMM; it will not fit or function in slots wired for RDIMM, LRDIMM or SODIMM modules. Buyers whose systems require registered memory or a different pin layout must select a different module type.

特長

  • 32 GB DDR5 5600 MHz capacity for high-throughput workloads
  • ECC error correction prevents silent data corruption and crashes
  • 2Rx8 unbuffered UDIMM matches Supermicro X13SAW-F slot requirements
  • 1 V operation at CL46 latency runs at rated speed
  • 288-pin DDR5 form factor ensures physical and electrical compatibility

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K1
Capacity32GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install this 288-pin DDR5 ECC UDIMM on the Supermicro X13SAW-F and what step is often missed?

Align the module key with the slot notch, press firmly until both retention clips click, then verify the motherboard manual's required DIMM population order for 2Rx8 modules.

What maintenance or replacement will this 32GB DDR5 5600MHz ECC UDIMM need over time?

No scheduled maintenance is required; the module has no heat spreader, so keep chassis airflow clear, and replace only if ECC logs report uncorrectable errors.

What limit appears first when this CL46 1.1V DDR5 ECC memory runs sustained workloads?

The CL46 latency at 5600MHz sets the timing boundary; sustained throughput is capped by the JEDEC 1.1V voltage and unbuffered topology.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。