暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 384GB 4x96GB DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM Supermicro X14SDW-36C-SP9F memory upgrade

SKU CH-BDC6-CTSY3

A 384 GB kit of four 96 GB DDR5-5600 registered ECC RDIMMs at 1.1 V, CL46, 2Rx4, validated for the Supermicro X14SDW-36C-SP9F motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

  • 384 GB capacity across four 96 GB modules expands server memory headroom
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for the platform
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's voltage requirement for reliable start-up
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-36C-SP9F memory slots exactly

Server memory kit

This NEMIX RAM kit delivers 384 GB across four 96 GB DDR5 RDIMM modules built for the Supermicro X14SDW-36C-SP9F motherboard. It targets administrators who need maximum registered ECC capacity in a validated configuration.

Registered ECC RDIMM

The single specification that decides fitment is the 2Rx4 registered ECC organisation at 1.1 V with CL46 timing on a 288-pin DDR5 interface. Only modules matching this exact rank, voltage and latency will be recognised at full capacity and rated speed.

Straightforward installation

Installation follows the motherboard manual population order for four DIMMs; the registered design keeps the memory controller stable when every slot is filled. The usual issue is mixing ranks or voltages from other kits, which prevents the system from posting at the rated 5600 MT/s.

特長

  • 384 GB capacity across four 96 GB modules expands server memory headroom
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for the platform
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's voltage requirement for reliable start-up
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-36C-SP9F memory slots exactly

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 5600 MT/s rating deliver once the kit is installed in the Supermicro X14SDW-36C-SP9F?

The four 96 GB modules run at DDR5-5600 (PC5-44800) with CL46 latency, giving the board its full rated bandwidth when all slots are populated.

How does the 288-pin RDIMM interface limit usable speed or capacity on this motherboard?

The registered 288-pin RDIMM form factor is exactly what the X14SDW-36C-SP9F requires; it supports the full 384 GB kit at the rated 5600 MT/s without down-clocking.

What physical clearance or slot layout does the 4×96 GB kit need on the X14SDW-36C-SP9F?

Each module is a standard-height 288-pin RDIMM with no heat spreader, so they fit the board's regular DIMM slots following the manual's population order.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。