SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00501099BTC
在庫あり
NEMIX RAM
NEMIX RAM 384GB (4x96GB) DDR5 5600 CL46 ECC RDIMM memory upgrade
384 GB of DDR5 5600 ECC registered server memory in four 96 GB modules for Supermicro systems
- Capacity384GB (4 x 96GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 384 GB total capacity from four 96 GB modules
- DDR5 5600 MT/s speed rated at PC5-44800
- ECC registered RDIMM protects data integrity in servers
- 1 V operating voltage reduces power draw per module
- Validated for SuperMicro B13SEE-CPU-25G motherboard compatibility
NEMIX RAM 384GB DDR5 5600 ECC RDIMM Kit
This 384GB kit contains four 96GB DDR5 5600 registered ECC modules. It is built for Supermicro B13SEE-CPU-25G motherboards that require registered memory with error correction. The modules operate at 1.1V with CL46 latency.
Suited for servers needing maximum registered ECC
Ideal for administrators expanding a compatible Supermicro platform to 384GB with a matched quad-channel kit. Not for desktop boards that accept only unbuffered UDIMM memory, nor for systems limited to lower densities or slower DDR5 speeds.
Verify motherboard model and slot population rules
Confirm the Supermicro B13SEE-CPU-25G supports 96GB 2Rx4 RDIMMs at DDR5 5600 and that all four slots can be populated at rated speed. Check the vendor memory qualification list for this exact part number before ordering.
特長
- 384 GB total capacity from four 96 GB modules
- DDR5 5600 MT/s speed rated at PC5-44800
- ECC registered RDIMM protects data integrity in servers
- 1 V operating voltage reduces power draw per module
- Validated for SuperMicro B13SEE-CPU-25G motherboard compatibility
仕様
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K4 |
| Capacity | 384GB (4 x 96GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 384GB (4X96GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT |
この商品に関する質問
Does this kit require a SuperMicro B13SEE-CPU-25G motherboard with 288-pin DDR5 RDIMM slots to operate?
Yes, the 384 GB kit is built for the SuperMicro B13SEE-CPU-25G and needs its 288-pin DDR5 RDIMM sockets; the modules are registered ECC RDIMMs that only fit that slot type.
Can the four 96 GB modules run together with existing DDR5 4800 registered ECC RDIMMs already installed in the same server?
The kit is rated at DDR5 5600 CL46 1.10 V; if older DDR5 4800 RDIMMs remain installed the memory controller will downclock all channels to the lowest common speed and tightest supported timings.
How can I confirm the full 384 GB is recognised and ECC is active after installing the four modules?
Enter the system BIOS or UEFI and verify the memory summary shows 384 GB total across four 96 GB DIMMs with ECC enabled and the running speed reported as 5600 MT/s.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
