暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 48GB DDR5 5600 CL46 288-Pin UDIMM Supermicro BH4SRG memory upgrade

SKU CH-9F7G-36QRG

A 48 GB DDR5 module at 5600 MT/s with CL46 latency, built for Supermicro BH4SRG systems

  • Capacity48GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 48 GB capacity lifts multitasking headroom for demanding workloads
  • DDR5 5600 speed moves data faster than older standards
  • CL46 latency keeps response tight under load
  • 1 V operation reduces power draw and heat
  • 288-pin UDIMM fits Supermicro BH4SRG motherboards directly

Supermicro BH4SRG memory upgrade

This 48 GB DDR5 module is built for the Supermicro BH4SRG motherboard and targets users who need a single high-capacity stick to expand system memory without populating multiple slots.

5600 MHz CL46 at 1.10 V

The module runs at DDR5 5600 with a CAS latency of 46 and operates at 1.10 V, so the motherboard must support that exact speed and voltage combination for the memory to train correctly.

Dual-rank 2Rx8 layout under load

The 2Rx8 organisation keeps both ranks active during sustained workloads, allowing the memory controller to interleave accesses and maintain steady throughput when the system is under continuous pressure. || Buyers who need ECC error correction or registered buffering for server-grade reliability cannot use this non-ECC unbuffered UDIMM.

特長

  • 48 GB capacity lifts multitasking headroom for demanding workloads
  • DDR5 5600 speed moves data faster than older standards
  • CL46 latency keeps response tight under load
  • 1 V operation reduces power draw and heat
  • 288-pin UDIMM fits Supermicro BH4SRG motherboards directly

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-4828K1
Capacity48GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content48GB (1 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM

この商品に関する質問

What does the 5600 MT/s rating mean once the module is installed in a Supermicro BH4SRG?

The module runs at DDR5 5600 MT/s (PC5-44800) with CL46 latency at 1.10 V; the motherboard's memory controller will operate it at that speed or the highest supported speed if lower.

How does the 288-pin DDR5 UDIMM interface limit performance in practice?

The 288-pin DDR5 UDIMM form factor provides the electrical and mechanical connection for DDR5 5600 operation; maximum throughput is defined by the 5600 MT/s data rate and CL46 timing.

What physical space and mounting does the 48 GB stick need in the BH4SRG?

It is a single 288-pin UDIMM module with 2Rx8 organisation, no heat spreader, and standard 1.10 V DDR5 height, so it fits any available UDIMM slot on the board.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。