暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 48GB DDR5 5600 ECC RDIMM 2Rx8 CL46 1.1V Supermicro H13SST-G memory upgrade

SKU CH-YPVB-DSN7F

48 GB DDR5 5600 ECC registered RDIMM, CL46 1.1 V, validated for the Supermicro H13SST-G motherboard

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • Exact-match 48 GB DDR5-5600 CL46 2Rx8 RDIMM runs at rated speed
  • Registered ECC architecture offloads controller and corrects single-bit errors
  • Verified fit for Supermicro H13SST-G with 288-pin RDIMM slot requirement
  • 10 V operation matches server memory-controller specifications
  • Lifetime replacement warranty with free US-based technical support

48GB DDR5 ECC RDIMM for Supermicro H13SST-G

This 48GB DDR5 5600 module delivers registered ECC memory with CL46 timing at 1.10V. The 2Rx8 dual-rank organization and 288-pin RDIMM form factor match the exact specifications your server board requires for full-capacity recognition and rated-speed operation.

Suited for single-slot upgrades

Registered architecture with ECC supports stable operation in multi-DIMM configurations where data integrity matters. Builders using unbuffered UDIMM or SODIMM slots cannot install this module, and systems requiring lower CAS latency or non-ECC memory should look elsewhere.

Verify motherboard population rules

Consult the Supermicro H13SST-G manual for approved DIMM installation order, maximum capacity per slot, and any BIOS version requirements before ordering. Confirm the board accepts 2Rx8 registered ECC DDR5 at 5600 MT/s to ensure compatibility.

特長

  • Exact-match 48 GB DDR5-5600 CL46 2Rx8 RDIMM runs at rated speed
  • Registered ECC architecture offloads controller and corrects single-bit errors
  • Verified fit for Supermicro H13SST-G with 288-pin RDIMM slot requirement
  • 10 V operation matches server memory-controller specifications
  • Lifetime replacement warranty with free US-based technical support

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What motherboard slot and memory type does my Supermicro H13SST-G need to accept this 288-pin DDR5 RDIMM?

The board must provide a 288-pin DDR5 RDIMM slot; this module is a registered ECC DDR5 DIMM and will not fit UDIMM or SODIMM sockets.

Will this 2Rx8 1.1V CL46 kit run at its rated 5600 speed when I populate all slots on my H13SST-G?

Yes — the registered architecture offloads the memory controller so every slot can run fully populated at the rated 5600 MT/s, provided the board's population rules are followed.

How can I confirm the system sees the full 48GB at DDR5-5600 with ECC active after installation?

Check POST or BIOS memory info for 48GB capacity, 5600 MT/s speed, and ECC enabled; the registered design and exact CL46 timing ensure the controller recognises the module at full spec.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。