暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM for POSIFLEX HC-1021 memory upgrade

SKU CH-MW6A-J2FKF

4 GB DDR3 1333 SODIMM for POSIFLEX HC-1021 terminal, 2Rx8 CL9 unbuffered

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4GB DDR3 1333 memory boosts POS terminal responsiveness
  • 35V low-voltage module reduces power draw in kiosk hardware
  • 204-pin SODIMM fits POSIFLEX HC-1021 21.5-inch touch screen
  • Major OEM Samsung Micron Hynix chips deliver tested reliability
  • CL9 CAS latency supports smooth transaction processing

System-specific SODIMM for POS terminals

This 4 GB DDR3 SODIMM is built for the POSIFLEX HC-1021 21.5-inch touch-screen infotainment terminal. It delivers 1333 MHz speed at CL9 latency in a 204-pin unbuffered non-ECC form factor. The module uses major-brand Samsung, Micron or Hynix chips and operates at 1.35 V.

Replaces original HC-1021 memory

Upgrading from the factory-fitted module is worthwhile when the terminal runs multiple POS applications simultaneously and shows sluggish response. The 2Rx8 organisation provides dual-rank density that the original single-rank stick may lack. No BIOS change is required for this direct replacement.

Handles typical POS workloads

The 4 GB capacity comfortably runs Windows Embedded or Linux-based POS suites with local databases and peripheral drivers. Headroom becomes tight when background analytics, digital-signage overlays or virtualised instances are added. For heavier multi-tasking the system would need additional slots or higher-density modules.

特長

  • 4GB DDR3 1333 memory boosts POS terminal responsiveness
  • 35V low-voltage module reduces power draw in kiosk hardware
  • 204-pin SODIMM fits POSIFLEX HC-1021 21.5-inch touch screen
  • Major OEM Samsung Micron Hynix chips deliver tested reliability
  • CL9 CAS latency supports smooth transaction processing

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

What slot does the 204-pin SODIMM fit in the POSIFLEX HC-1021?

It installs directly into the DDR3 SODIMM slot on the POSIFLEX HC-1021 motherboard.

How do I install the module and what step is often missed?

Power off the terminal, open the memory cover, align the notch on the module with the slot key, insert fully, then press down until the retaining clips lock automatically.

Will this 4 GB DDR3 module need replacement during the terminal's life?

The module has no moving parts and requires no scheduled maintenance; it only needs replacement if a fault develops or capacity must be increased.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。