暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-PIN SODIMM POSIFLEX KS-7412 memory upgrade

SKU CH-NECW-M1WKS

4 GB DDR3 SODIMM rated at 1333 MHz with CL9 timing for the POSIFLEX KS-7412 terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX KS-7412 terminal
  • DDR3 1333 speed for responsive operation
  • Low 1.35V voltage reduces power draw
  • 2Rx8 rank layout fits system slot
  • Major OEM chips ensure reliable performance

POSIFLEX KS-7412 memory upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX KS-7412 compact fanless point-of-sale terminal. It uses a 204-pin unbuffered non-ECC module running at 1333 MHz with CL9 latency. The stick draws 1.35 V and fits the system's specific memory slot.

Replaces slower or smaller factory memory

Swapping the original module for this PC3-10600 part adds capacity and bandwidth for POS software that juggles inventory, payments and peripherals. The jump is worth it when the terminal stutters during peak checkout or when the OS relies heavily on paging.

Sustained load behaviour

Major OEM chips from Samsung, Micron or Hynix are stress tested under load before shipping. The unbuffered design keeps latency low during long trading hours without active cooling. Voltage stays at 1.35 V so the fanless chassis thermal budget is not exceeded.

特長

  • Designed for POSIFLEX KS-7412 terminal
  • DDR3 1333 speed for responsive operation
  • Low 1.35V voltage reduces power draw
  • 2Rx8 rank layout fits system slot
  • Major OEM chips ensure reliable performance

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

Will the 204-pin SODIMM fit the POSIFLEX KS-7412 memory slot?

Yes, the module uses a standard 204-pin DDR3 SODIMM form factor that matches the KS-7412 terminal's slot.

What is the correct orientation step when inserting the module?

Align the notch on the module edge with the key in the slot, press firmly until the side clips snap into place.

Does the 1.35 V rating mean I must replace it with another low-voltage stick later?

The module runs at 1.50 V per the specification; a standard DDR3 1333 SODIMM can be used for future replacement.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。