暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX PS-3516Q memory upgrade

SKU CH-1QFK-NVR91

4GB DDR3 1333 SODIMM module tested for POSIFLEX PS-3516Q point-of-sale terminals

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX PS-3516Q terminal
  • DDR3 1333 speed for responsive operation
  • Low 1.35V voltage reduces power draw
  • 204-pin SODIMM fits compatible slots directly
  • 2Rx8 organisation supports stable multitasking

POS terminal memory upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX PS-3516Q point-of-sale terminal. It delivers 1333 MHz speed with CL9 latency and 2Rx8 organisation in a 204-pin form factor. The module is non-ECC, unbuffered and runs at 1.35 V low voltage.

Straightforward SODIMM installation

The stick slots into the terminal’s memory socket without tools and is keyed to prevent misalignment. Because the system is fanless, ensure the module is fully seated before closing the chassis to avoid intermittent contact. No BIOS configuration is required beyond standard SPD detection.

Steady operation in fanless environments

Rated at 1.35 V with major OEM chips from Samsung, Micron or Hynix, the module maintains stable throughput during continuous transaction processing. The low-voltage design reduces thermal load inside the sealed enclosure, helping the terminal sustain performance over long shifts without throttling.

特長

  • Designed for POSIFLEX PS-3516Q terminal
  • DDR3 1333 speed for responsive operation
  • Low 1.35V voltage reduces power draw
  • 204-pin SODIMM fits compatible slots directly
  • 2Rx8 organisation supports stable multitasking

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

How do I verify the module runs at DDR3 1333 CL9 after installing it in the POSIFLEX PS-3516Q?

Enter the BIOS or use a system-info tool such as CPU-Z; the memory tab should show 1333 MHz, PC3-10600 and CL9 timings, confirming the rated speed and latency.

What comes in the package and do I need any extra parts for the POSIFLEX PS-3516Q?

The box contains one 4 GB 204-pin DDR3 SODIMM (part MS10600-428K1). No additional memory parts are required; the terminal has a single SODIMM slot that this module fills.

Which capacity should I choose if the POSIFLEX PS-3516Q only accepts one SODIMM?

This 4 GB module is the only capacity listed for the PS-3516Q in this series, so it is the correct choice for a single-slot upgrade.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。