暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green bare DDR4 UDIMM stick with black chips and gold edge contacts

NEMIX RAM

NEMIX RAM 4GB DDR4 2133 CL15 ECC Unbuffered UDIMM memory upgrade

SKU CH-W97D-H2HBB

4GB DDR4 2133 ECC unbuffered UDIMM adds 4GB of error-correcting memory at 1.2V CL15

  • Capacity4GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 4GB capacity expands workstation memory headroom
  • DDR4 2133 speed handles demanding server workloads
  • ECC support protects data integrity in critical tasks
  • 2V operation reduces system power consumption
  • Unbuffered UDIMM design fits compatible Hynix systems

4 GB DDR4 2133 ECC UDIMM

This 4 GB DDR4 module runs at 2133 MT/s with CL15 latency and operates at 1.20 V. It is an unbuffered ECC UDIMM built with a 1Rx8 organisation on a 288-pin PCB. The stick is designed for workstation and server boards that require error-correcting memory.

Suited for ECC workstations not high-speed desktops

The module targets systems that mandate ECC and accept unbuffered DDR4 at 2133 MT/s. It will not fit boards limited to registered DIMMs or platforms that only support non-ECC memory. Buyers needing higher frequencies or larger single-stick capacities should look elsewhere.

4 GB capacity for light multi-tasking

A single 4 GB stick handles basic office workloads, lightweight virtualization and entry-level NAS duties. It runs out quickly with modern databases, heavy containers or multiple VMs. Adding more identical modules expands headroom if the motherboard has free slots.

特長

  • 4GB capacity expands workstation memory headroom
  • DDR4 2133 speed handles demanding server workloads
  • ECC support protects data integrity in critical tasks
  • 2V operation reduces system power consumption
  • Unbuffered UDIMM design fits compatible Hynix systems

仕様

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2133MHZ ECC Unbuffered UDIMM
Part NumberME17000-418K1
Capacity4GB
SpeedDDR4 2133 (PC4 17000)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL15
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank1Rx8
FeaturesDDR4 2133MHZ ECC Unbuffered UDIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR4 2133MHZ PC4-17000 1Rx8 1.2V CL15 288-PIN ECC Unbuffered UDIMM

この商品に関する質問

Does my motherboard need 288-pin DDR4 slots to use this 2133 MHz ECC UDIMM?

Yes, this module uses the 288-pin DDR4 form factor and requires a motherboard with matching DDR4 DIMM slots that support ECC unbuffered memory.

Can I add this CL15 1.2 V stick to a system that already runs CL15 1.2 V DDR4 ECC modules?

Yes, matching speed, voltage and latency lets it run alongside existing CL15 1.2 V DDR4 ECC UDIMMs, provided the board supports the total capacity and rank configuration.

How do I confirm the module is detected at 2133 MHz with ECC active after installation?

Enter the BIOS or UEFI and verify the memory frequency shows 2133 MHz and ECC status is reported as enabled or active for the new DIMM.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。