SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00501349BTC
在庫あり
NEMIX RAM
NEMIX RAM 576GB 6x96GB DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H13SSH-E memory upgrade
A 576 GB DDR5 ECC RDIMM kit (6 × 96 GB) at 5600 MT/s, CL46, 1.1 V, 2Rx4, 288-pin, validated for the Supermicro H13SSH-E motherboard
- Capacity576GB (6 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 576 GB total capacity with six 96 GB modules for maximum server density
- DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
- CL46 CAS latency and 1.1 V operation matching the board's memory controller
- 2Rx4 Registered ECC RDIMM design corrects single-bit errors and stabilises fully populated slots
- 288-pin form factor verified for Supermicro H13SSH-E motherboard compatibility
Exact-Match DDR5 Kit
This 576GB kit contains six 96GB DDR5 5600 RDIMMs built to the Supermicro H13SSH-E motherboard's specifications. Registered ECC modules with 2Rx4 organisation and CL46 timing are recognised at full capacity by the server's memory controller. It targets administrators who need the precise rank, voltage and timing the board expects.
Capacity and Headroom
Six slots filled with 96GB RDIMMs deliver 576GB of registered ECC memory running at 1.1V. The registered architecture offloads the memory controller so every slot operates at rated speed while ECC corrects single-bit errors on the fly. Headroom ends when the board's maximum supported capacity or approved population order is reached.
Upgrade Path
The kit replaces any smaller or mismatched DDR5 RDIMM configuration that prevents the H13SSH-E from reaching its full memory potential. The jump is worth it when the server requires the exact 2Rx4 registered ECC profile to boot all slots at DDR5 5600 without down-clocking or capacity limits.
特長
- 576 GB total capacity with six 96 GB modules for maximum server density
- DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
- CL46 CAS latency and 1.1 V operation matching the board's memory controller
- 2Rx4 Registered ECC RDIMM design corrects single-bit errors and stabilises fully populated slots
- 288-pin form factor verified for Supermicro H13SSH-E motherboard compatibility
仕様
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K6 |
| Capacity | 576GB (6 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 6X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
この商品に関する質問
Will the 2Rx4 registered ECC DDR5 modules work with the existing RDIMMs already installed in my Supermicro H13SSH-E?
The kit is validated for the H13SSH-E using 288-pin registered DDR5 at 5600 MT/s, 1.1 V and CL46; matching those specs lets the memory controller recognise all six slots at full capacity.
How can I verify the kit is running at its rated 5600 MT/s with ECC active after installation?
Enter the system firmware and confirm each of the six slots shows 96 GB at the rated speed with ECC enabled, then run a standard memory diagnostic to validate stability.
What exactly ships in the box and is anything else required to complete the upgrade?
The box contains the six 96 GB DDR5 5600 CL46 2Rx4 registered ECC RDIMMs; no additional cables, brackets or cooling parts are included or needed for installation.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
