暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules without heat spreaders in a kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5-6400 ECC RDIMM CL52 2Rx4 1.1V memory upgrade for Supermicro X14SDW-40C-SP9F

SKU CH-APCD-V9DPV

64 GB dual-channel kit of DDR5-6400 ECC registered RDIMMs tuned to CL52 at 1.1 V for the Supermicro X14SDW-40C-SP9F motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

  • Exact DDR5-6400 ECC RDIMM spec match for Supermicro X14SDW-40C-SP9F
  • Registered 2Rx4 architecture runs fully populated at rated 6400 MT/s
  • ECC corrects single-bit errors preventing silent data corruption
  • 64 GB kit (2 × 32 GB) at standard 1.10 V DDR5 voltage
  • Lifetime replacement warranty with US-based technical support

Exact-fit DDR5 RDIMM kit

This 64 GB kit consists of two 32 GB DDR5-6400 Registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro X14SDW-40C-SP9F memory controller expects. The 288-pin modules install directly into the board's DDR5 slots for immediate recognition at full rated speed.

Capacity and headroom

The dual-rank 2Rx4 organisation delivers 64 GB total capacity, allowing the server to run fully populated at DDR5-6400 without down-clocking. ECC corrects single-bit errors on the fly while the registered buffer offloads the controller, so stability is maintained across every populated channel under sustained workloads.

Registered ECC requirement

Only DDR5 Registered ECC RDIMMs with 1.1 V operation and CL52 timing match this motherboard's specification; UDIMMs, SODIMMs or non-ECC modules will not function. Verify your system manual for approved population order before installation.

特長

  • Exact DDR5-6400 ECC RDIMM spec match for Supermicro X14SDW-40C-SP9F
  • Registered 2Rx4 architecture runs fully populated at rated 6400 MT/s
  • ECC corrects single-bit errors preventing silent data corruption
  • 64 GB kit (2 × 32 GB) at standard 1.10 V DDR5 voltage
  • Lifetime replacement warranty with US-based technical support

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-324K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 64GB DDR5-6400 ECC RDIMM kit run alongside existing DDR5 modules in my Supermicro X14SDW-40C-SP9F?

Mixing DIMMs of different ranks, speeds, or capacities can prevent the server from training memory at DDR5-6400 CL52 1.1V. The board manual lists the approved population order and maximum capacity per channel; follow that guide before adding these 2Rx4 Registered modules to any occupied slots.

How can I verify the kit is recognised at DDR5-6400 CL52 with ECC active after installation?

Enter the BIOS or UEFI and confirm the memory frequency reads 6400 MT/s, CAS latency shows CL52, voltage is 1.10 V, and ECC status is enabled. The operating system should report 64 GB total with ECC correctable-error counters incrementing cleanly under load.

What is included in the box and do I need any extra parts to install it?

The package contains two 32 GB 288-pin DDR5 RDIMMs, giving 64 GB total. No heat spreaders, cables, or tools are supplied; the modules insert directly into the motherboard's DDR5 RDIMM slots.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。