BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
NEMIX RAM
A 64 GB kit of four 16 GB DDR5 4800 CL40 1.1 V UDIMM modules validated for the ASUS ProArt Z790-CREATOR WiFi motherboard
This 64 GB kit contains four 16 GB DDR5 UDIMM modules built for the ASUS ProArt Z790-CREATOR WiFi motherboard. It targets workstation users who need maximum supported memory capacity for content creation, rendering or virtualization workloads. The modules are non-ECC and unbuffered, matching the board’s consumer-class memory controller. No heat spreader is fitted, so clearance is minimal.
The kit runs at DDR5 4800 (PC5-38400) with a CAS latency of CL40 at 1.10 V. This is the baseline JEDEC speed for DDR5, so the memory controller will not require manual tuning to reach the rated frequency. Bandwidth and latency are fixed at this specification; higher data rates or tighter timings are not supported by this module. The 288-pin form factor fits only DDR5 slots.
Confirm that your motherboard is the exact ASUS ProArt Z790-CREATOR WiFi model, as compatibility is validated for this board only. Verify that all four DIMM slots are free and that the BIOS is updated to a version supporting 64 GB of non-ECC UDIMM memory. The kit uses 1Rx8 Samsung, Micron or Hynix ICs; mixed-rank populations are not covered by this validation.
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS Server Motherboard Compatible Series Memory |
| Model | ASUS DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASUS |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
The 64GB (4x16GB) kit fills all four DIMM slots on the board and runs at DDR5 4800 with CL40 latency.
The modules operate at DDR5 4800 (PC5-38400) with 1.10V and CL40 timing, giving the rated bandwidth and latency out of the box.
The kit uses standard 288-pin DDR5 UDIMM slots; the motherboard's memory controller and BIOS determine the maximum supported data rate.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?