暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge connectors and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 ECC RDIMM CL40 1.1V 2Rx4 SuperMicro Server memory upgrade

SKU CH-1Q66-WRQ6F

A 64 GB DDR5 4800 ECC registered DIMM at CL40 and 1.10 V for Supermicro 211-series servers

  • Capacity64GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB capacity handles heavy server workloads
  • DDR5 4800 speed moves data fast
  • ECC registered design protects data integrity
  • 1 V operation reduces power draw
  • Validated for SuperMicro SYS-211SE-31D and SYS-211SE-31A systems

SuperMicro DDR5 4800 ECC RDIMM

This 64 GB DDR5 4800 registered DIMM adds error-correcting memory to compatible SuperMicro IoT SuperServer platforms. It targets administrators who need single-module capacity expansion without mixing ranks or speeds. The CL40 2Rx4 organisation suits dense virtualisation hosts and database nodes that demand data integrity over raw latency.

Thermals noise and power draw

Operating at 1.1 V the module draws minimal power for a 64 GB DDR5 stick and runs without a heat spreader. Passive cooling relies on server chassis airflow so acoustic output stays at chassis fan level. Registered buffering reduces electrical load on the memory controller which helps keep system power stable under sustained workloads.

Upgrade path and value

The part replaces lower-capacity DDR5 RDIMMs or fills empty slots on SYS-211SE-31D SYS-211SE-31A and X31SEED-F motherboards. The jump is worthwhile when workloads exceed current physical memory and swapping degrades throughput. Buyers who need non-ECC unbuffered memory or speeds above 4800 MT/s should look elsewhere.

特長

  • 64 GB capacity handles heavy server workloads
  • DDR5 4800 speed moves data fast
  • ECC registered design protects data integrity
  • 1 V operation reduces power draw
  • Validated for SuperMicro SYS-211SE-31D and SYS-211SE-31A systems

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (1X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

この商品に関する質問

How do I install this 288-pin DDR5 RDIMM in my SuperMicro SYS-211SE-31D and what step is often missed?

Align the notch on the module with the slot key, press firmly until both side clips click shut, then verify in BIOS that all 64GB are detected at 4800 MT/s; the step often missed is fully seating both clips so the register engages.

What maintenance or replacement will this ECC RDIMM need over its service life?

No scheduled maintenance is required; the module has no heat spreader and runs at 1.10V, so only replace it if system logs report uncorrectable ECC errors or a DIMM slot fails.

What limit appears first when this CL40 2Rx4 module runs sustained workloads?

The CAS latency of CL40 at 4800 MT/s sets the timing ceiling; sustained throughput is bounded by the registered buffer and dual-rank organisation before thermal throttling becomes a factor.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。