暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 64GB DDR5 5600 PC5-44800 2Rx4 CL46 1.1V ECC Registered RDIMM Supermicro H14SSL-NT memory upgrade

SKU CH-X8VF-ZBF20

64GB DDR5-5600 ECC Registered RDIMM validated for the Supermicro H14SSL-NT motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB

他に 24点の構成を表示
  • 64 GB capacity lets the server handle larger workloads
  • DDR5 5600 speed matches the board's rated frequency
  • Registered ECC architecture corrects single-bit errors on the fly
  • 1 V operation meets the platform's voltage spec
  • 288-pin RDIMM form factor fits the Supermicro H14SSL-NT slots

64GB DDR5-5600 RDIMM for Supermicro H14SSL-NT

This 64GB DDR5 5600MHz PC5-44800 registered ECC module is built for the Supermicro H14SSL-NT motherboard. It delivers the exact 2Rx4 rank structure, 1.1V voltage and CL46 timing the platform expects. Server administrators upgrading memory capacity in validated configurations will find it matches the board's population rules.

288-pin registered form factor with major OEM chips

The 288-pin RDIMM design uses Samsung, Micron or Hynix components without a heat spreader, fitting standard server DIMM slots. Registered buffering reduces electrical load on the memory controller when all slots are populated, while on-die ECC corrects single-bit errors to prevent silent data corruption. The module installs directly into the H14SSL-NT's DDR5 slots following the manual's population order.

Replaces lower-capacity or slower DDR5 RDIMMs

This kit upgrades systems running smaller registered DIMMs or slower DDR5 speeds, adding 64GB per slot at the full 5600MT/s data rate. The jump is worthwhile when your workload needs maximum registered capacity per channel and the motherboard manual confirms support for this density and rank. It does not fit boards requiring UDIMM, SODIMM or non-ECC memory.

特長

  • 64 GB capacity lets the server handle larger workloads
  • DDR5 5600 speed matches the board's rated frequency
  • Registered ECC architecture corrects single-bit errors on the fly
  • 1 V operation meets the platform's voltage spec
  • 288-pin RDIMM form factor fits the Supermicro H14SSL-NT slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What speed does the DDR5 5600 interface actually run at on the Supermicro H14SSL-NT?

The module operates at DDR5 5600 (PC5-44800) with CL46 latency at 1.1V, delivering the exact data rate the motherboard's memory controller expects when populated per its rules.

What physical slot and form factor does this 64 GB RDIMM require?

It uses a 288-pin DDR5 RDIMM form factor; the board needs a registered DIMM slot, not a UDIMM or SODIMM socket, and the 2Rx4 rank must follow the manual's population order.

How is the module installed and which step is most often missed?

Power down, open the chassis, align the 288-pin key with the RDIMM slot, press firmly until both latches click, then verify the BIOS recognises the full 64 GB at 5600 MT/s — skipping the population-order check is the common error.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。