暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 64GB DDR5 5600MHz CL46 2Rx4 1.1V ECC Registered RDIMM memory upgrade for Supermicro X14SRG-TF

SKU CH-78MG-1TPX5

64GB DDR5 5600MHz ECC Registered RDIMM with CL46 timing and 1.1V operation, validated for Supermicro X14SRG-TF motherboards

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 64 GB capacity for large server workloads
  • DDR5 5600 MHz speed rated at PC5-44800
  • Registered ECC design prevents silent data corruption
  • 2Rx4 rank with 1.10 V voltage matches motherboard specs
  • 288-pin RDIMM form factor fits Supermicro X14SRG-TF

Exact-Match DDR5 RDIMM for Supermicro X14SRG-TF

This 64GB registered ECC module runs at DDR5 5600 with CL46 latency and 1.1V operation. The 2Rx4 dual-rank layout matches the memory controller expectations of the Supermicro X14SRG-TF motherboard. It installs in a standard 288-pin DDR5 RDIMM slot.

Replaces non-ECC or slower registered memory

Swapping unbuffered UDIMMs or lower-speed RDIMMs for this spec-matched kit enables full-slot population at rated frequency. The jump is worth it when your workload demands error correction and maximum capacity per channel without downclocking.

Handles large in-memory databases

64GB per module provides substantial headroom for multi-VM hosts and analytics workloads. Registered buffering keeps signal integrity intact across fully populated channels. It runs out when an application requires more total capacity than the motherboard's maximum supported memory or when a UDIMM-only platform is used.

特長

  • 64 GB capacity for large server workloads
  • DDR5 5600 MHz speed rated at PC5-44800
  • Registered ECC design prevents silent data corruption
  • 2Rx4 rank with 1.10 V voltage matches motherboard specs
  • 288-pin RDIMM form factor fits Supermicro X14SRG-TF

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 288-pin DDR5 RDIMM fit the DIMM slots on my Supermicro X14SRG-TF motherboard?

Yes. The module uses the 288-pin RDIMM form factor required by the X14SRG-TF, so it seats directly in the board's DDR5 DIMM slots.

What is the correct installation sequence for this 2Rx4 registered ECC module on the X14SRG-TF?

Consult the motherboard manual for the approved DIMM population order; registered ECC DIMMs must be installed in the specific slot sequence the board defines to initialise at 5600 MHz.

Does the 1.1 V DDR5 module require any firmware updates or periodic maintenance after installation?

No scheduled maintenance is needed; the module runs at its rated 1.1 V and CL46 timing once the BIOS recognises the SPD profile, and ECC error correction operates automatically.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。