暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green bare circuit board with gold edge connectors and black memory chips

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 CL15 1Rx4 ECC RDIMM memory upgrade

SKU CH-DZS1-G5KTT

An 8 GB DDR4 2133 ECC registered DIMM with CL15 latency for compatible Hynix servers and workstations

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection safeguards data integrity
  • Registered design stabilises heavy server workloads
  • 2 V operation reduces power draw
  • CL15 latency at 2133 MHz speeds response
  • 8 GB single module simplifies capacity upgrades

8 GB DDR4-2133 ECC RDIMM module

This 8 GB registered DIMM runs at DDR4 2133 (PC4-17000) with CL15 latency and 1.2 V operation. It uses a single-rank 1Rx4 organisation and includes ECC for data-integrity protection in server workloads. The module is built with major-OEM chips and validated against Hynix HMA41GR7 part numbers.

Registered DIMM constraint

Registered memory requires a motherboard that supports buffered modules; standard desktop boards will not initialise this stick. The DDR4-2133 interface caps bandwidth at the PC4-17000 rate, so faster CPUs or chipsets cannot push this module beyond its rated speed. Mixing registered and unbuffered DIMMs on the same channel is not supported by any platform.

Verify RDIMM support and slot count

Confirm the target system lists RDIMM compatibility and accepts 288-pin DDR4 modules before purchase. Check the maximum per-slot capacity and total memory limit in the vendor manual, as some platforms restrict registered DIMM populations. Ensure the operating voltage is 1.2 V and that no BIOS revision blocks third-party registered memory.

特長

  • ECC protection safeguards data integrity
  • Registered design stabilises heavy server workloads
  • 2 V operation reduces power draw
  • CL15 latency at 2133 MHz speeds response
  • 8 GB single module simplifies capacity upgrades

仕様

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2133MHZ ECC RDIMM Registered Server Memory
Part NumberMR17000-814K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL15
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 1Rx4 1.2V CL15 288-PIN ECC RDIMM Registered Server Memory

この商品に関する質問

Should I choose the 8 GB module or add a second stick for dual-channel?

This listing is a single 8 GB DDR4 2133 CL15 1Rx4 registered ECC RDIMM; add a second identical module if your server board supports dual-channel population.

What does the 2133 MT/s rating deliver in a live server?

The module runs at DDR4 2133 (PC4-17000) with CL15 latency at 1.20 V, providing registered ECC bandwidth for stable server workloads.

Will the 288-pin RDIMM fit my Hynix-compatible motherboard?

Yes, the 288-pin DDR4 registered DIMM is built to match Hynix HMA41GR7AFR4N-TF, HMA41GR7BJR4N-TF and HMA41GR7MFR4N-TF modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。