暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips no heat spreader 288 pin DDR4 desktop module

NEMIX RAM

NEMIX RAM 8GB DDR4 2933MHz CL21 desktop RAM

SKU CH-N7MR-DD8GV

Adds 8 GB of DDR4 2933 MHz CL21 non-ECC UDIMM memory at 1.2 V using 288-pin modules built with major-brand chips

  • Capacity8GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo
  • 8GB capacity expands system memory for smoother multitasking
  • DDR4 2933MHz speed moves data quickly between CPU and RAM
  • CL21 latency keeps response times tight for everyday workloads
  • 2V operation reduces power draw and heat output
  • 288-pin UDIMM fits standard desktop DDR4 slots

8GB DDR4 2933MHz Desktop Module

This NEMIX RAM module provides 8GB of DDR4 memory at 2933MHz with a CL21 latency. It uses a standard 288-pin UDIMM form factor and operates at 1.20V. The kit is a single 1Rx8 rank stick built with major OEM chips from Samsung, Micron or Hynix. It carries no heat spreader and includes no lighting.

Suits standard desktop upgrades.

This unbuffered non-ECC DIMM fits typical consumer motherboards that accept DDR4 2933MHz memory. It is compatible with the Dell part SNPJ69DFC/8G and similar platforms. Systems requiring registered, fully buffered or ECC memory cannot use this module. Buyers needing error correction or server-grade registration should select a different product.

288-pin DDR4 UDIMM interface decides fit

The module uses the 288-pin DDR4 UDIMM interface, which is the sole physical and electrical key for motherboard compatibility. Verify that the target board supports DDR4 UDIMM at 2933MHz and non-ECC unbuffered operation before purchase. No other specification overrides this requirement.

特長

  • 8GB capacity expands system memory for smoother multitasking
  • DDR4 2933MHz speed moves data quickly between CPU and RAM
  • CL21 latency keeps response times tight for everyday workloads
  • 2V operation reduces power draw and heat output
  • 288-pin UDIMM fits standard desktop DDR4 slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD23400-818K1
Capacity8GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

この商品に関する質問

Is the single 8GB module the right choice or should I look for a different capacity?

This listing is a single 8GB DDR4 2933MHz CL21 UDIMM; if your board has free slots you can add another identical stick later, but the product itself is only the one 8GB module.

What does the 2933MHz rating mean once the stick is installed in my desktop?

The module runs at 2933 MT/s (PC4-23400) with CL21 latency at 1.2V; actual throughput depends on your motherboard's memory controller and whether it supports that speed natively or down-clocks it.

Does the 288-pin DDR4 interface limit the speed or capacity I can use?

The 288-pin DDR4 UDIMM form factor fits standard desktop slots; the stick itself is rated 2933MHz CL21, so the interface does not impose a lower cap — your platform's memory controller determines the final operating speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。