暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge connectors and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 260-Pin SODIMM POSIFLEX JK-2752 memory upgrade

SKU CH-2TSB-WHS36

8GB DDR4 3200 SODIMM module with CL22 latency and 1.20V operation for POSIFLEX JK-2752 kiosks

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity expands multitasking headroom for kiosk workloads
  • DDR4 3200 speed matches POSIFLEX JK-2752 system requirements
  • CL22 latency with 1.20V voltage ensures stable operation
  • 260-pin SODIMM form factor fits the Cachet Series slot
  • Major OEM chips from Samsung, Micron or Hynix deliver tested reliability

POSIFLEX JK-2752 compatible DDR4 SODIMM

This 8 GB DDR4 3200 module is built specifically for the POSIFLEX JK-2752 Cachet Series kiosk. It uses a 260-pin SODIMM form factor with CL22 latency and 1.2 V operation. The unbuffered, non-ECC design matches the original system requirements for straightforward installation.

Sustained workload stability for kiosk duty

Every module undergoes rigorous stress testing under load to verify reliability in continuous operation. The 2Rx8 organisation using major OEM chips from Samsung, Micron or Hynix delivers consistent throughput during extended retail or hospitality shifts. This validation targets the steady-state demands of point-of-sale environments rather than brief benchmark runs.

Low-voltage efficiency without a heat spreader

Operating at 1.20 V keeps power draw modest inside the compact kiosk chassis. The absence of a heat spreader reflects the module's standard thermal profile for this platform. Silent, passively cooled operation suits noise-sensitive countertop deployments where active cooling is impractical.

特長

  • 8GB capacity expands multitasking headroom for kiosk workloads
  • DDR4 3200 speed matches POSIFLEX JK-2752 system requirements
  • CL22 latency with 1.20V voltage ensures stable operation
  • 260-pin SODIMM form factor fits the Cachet Series slot
  • Major OEM chips from Samsung, Micron or Hynix deliver tested reliability

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

Does the 1.20 V DDR4 module run cooler than higher-voltage memory during continuous POS operation?

At 1.20 V the SODIMM draws standard DDR4 power, so heat output matches other 3200 MT/s unbuffered modules in a kiosk chassis.

Must the POSIFLEX JK-2752 already have a free 260-pin SODIMM slot to accept this upgrade?

Yes, the 260-pin DDR4 SODIMM installs directly into an available DDR4 SO-DIMM socket on the JK-2752 motherboard.

Will this CL22 3200 MT/s stick down-clock reliably alongside slower DDR4 modules already in the kiosk?

The module follows JEDEC DDR4-3200 specs and will automatically run at the lowest common speed and latency of the installed memory.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。