暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 2Rx8 260-pin SODIMM POSIFLEX JK-2432 memory upgrade

SKU CH-9ET9-P0WJH

An 8 GB DDR4 SODIMM module running at 3200 MHz with CL22 latency, built for POSIFLEX JK-2432 kiosks

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity adds headroom for multitasking
  • DDR4 3200 speed supports fast data throughput
  • CL22 latency keeps timing tight for POS workloads
  • 20 V operation reduces power draw in kiosk systems
  • 260-pin SODIMM form factor fits POSIFLEX JK-2432 slot

Purpose-built POS upgrade

This NEMIX RAM module is an 8 GB DDR4 3200 SODIMM engineered specifically for the POSIFLEX JK-2432 Cachet Series kiosk. It arrives as a single 260-pin stick rated at PC4-25600 with CL22 latency and 1.20 V operation. The 2Rx8 unbuffered non-ECC design matches the original system specification.

Ideal for kiosk technicians

Technicians servicing the named POSIFLEX platform can install this module without configuration changes. It is not suited for general laptop upgrades, desktop DIMM slots or any system that requires ECC, registered buffering, a different pin count or a voltage other than 1.20 V. Buyers needing higher capacity or lower latency should look elsewhere.

Fits the factory slot

The stick plugs directly into the kiosk's existing SODIMM socket and draws standard DDR4 power, leaving the thermal solution and power budget untouched. No BIOS update or additional hardware is required, so the upgrade preserves the original chassis space and airflow.

特長

  • 8 GB capacity adds headroom for multitasking
  • DDR4 3200 speed supports fast data throughput
  • CL22 latency keeps timing tight for POS workloads
  • 20 V operation reduces power draw in kiosk systems
  • 260-pin SODIMM form factor fits POSIFLEX JK-2432 slot

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

Does this 260-pin DDR4 SODIMM fit the POSIFLEX JK-2432 kiosk without an adapter?

Yes, the module is built to the 260-pin DDR4 SODIMM form factor specified for the POSIFLEX JK-2432 Cachet Series, so it installs directly into the kiosk's memory slot.

If the kiosk already has slower DDR4 modules, will this CL22 3200 MHz stick run at the lower speed automatically?

The module operates at 3200 MHz with CL22 timing at 1.20 V; when mixed with slower DDR4 memory the system will downclock all modules to the lowest common speed.

After installing the 8 GB stick, how can I confirm the kiosk recognises the full capacity and speed?

Enter the BIOS or use a system-information tool in the OS to verify the installed memory shows 8 GB, DDR4 3200 (PC4-25600) and CL22 latency.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。