暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC RDIMM CL22 1Rx8 memory upgrade

SKU CH-F9AQ-V3B5E

Adds 8 GB of DDR4 3200 ECC registered memory with CL22 latency for Micron-compatible servers

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on dense server platforms
  • DDR4 3200 speed matches PC4-25600 bandwidth for responsive throughput
  • 2 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits standard server memory slots

8GB DDR4 3200 ECC RDIMM for Micron Servers

This 8 GB registered DIMM runs at DDR4 3200 with a CAS latency of CL22 and 1.20 V. It is built for Micron server and workstation platforms that require ECC error correction and registered signalling. The single-rank 1Rx8 organisation uses 288-pin DDR4 RDIMM form factor. Buyers who need unbuffered UDIMM modules or non-ECC memory for desktop boards cannot use this product.

Registered ECC limits to qualified server platforms

Registered ECC memory only functions in motherboards that explicitly support RDIMM and ECC operation; consumer chipsets will not initialise the module. The DDR4 3200 PC4-25600 interface provides the stated bandwidth within the server's qualified memory population rules. Mixing registered and unbuffered DIMMs, or exceeding the platform's rank-per-channel limit, will prevent the system from posting.

Straightforward slot installation

The 288-pin RDIMM inserts vertically into the server's DDR4 memory slots; alignment notches prevent incorrect orientation. No heat spreader is fitted, so clearance is minimal inside dense chassis. Always consult the system owner's manual for supported population order and maximum capacity per channel before installing. Incorrect slot order or unsupported rank configuration are the most common reasons the module is not recognised.

特長

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on dense server platforms
  • DDR4 3200 speed matches PC4-25600 bandwidth for responsive throughput
  • 2 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits standard server memory slots

仕様

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemMICRON
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

この商品に関する質問

Should I choose the 8GB 1Rx8 module or look for a different capacity?

This listing is a single 8GB 1Rx8 registered DIMM; add more identical modules to reach the total capacity your server board supports.

What does the 3200 MT/s rating deliver once installed in a server?

The module runs at DDR4-3200 (PC4-25600) with CL22 latency, providing ECC error correction and registered buffering for stable throughput in compatible Micron systems.

How does the 288-pin RDIMM interface limit real-world use?

The 288-pin DDR4 RDIMM form factor fits only DDR4 registered DIMM slots; it cannot be used in unbuffered UDIMM, SO-DIMM or DDR5 sockets.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。