EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
NEMIX RAM
8GB DDR4 3200 ECC registered DIMM with CL22 latency and 1.2V operation for server stability
This registered server module provides 8 GB of DDR4 memory at 3200 MT/s with ECC error correction. It is built for QNAP NAS devices that require registered DIMMs and operates at 1.2 V with CL22 latency.
The jump is worthwhile when your NAS workload demands data integrity through ECC or when the manufacturer specifies registered memory. It upgrades systems currently running at lower speeds or without error correction.
Check the vendor memory compatibility list for the exact part number MR25600-818K1. Ensure the chassis has a free DIMM slot and that the BIOS supports registered ECC memory at this speed and rank.
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Device Memory |
| Model | QNAP NAS Memory |
| Part Number | MR25600-818K1 |
| Capacity | 8GB |
| Type | 288-Pin DDR4 RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC RDIMM Registered Server Memory Motherboard Compatible |
Yes, this is a registered ECC RDIMM that requires a motherboard with RDIMM support; it will not work in standard UDIMM slots.
Align the off-centre notch on the 288-pin edge connector with the key in the DDR4 DIMM slot, press straight down until both retention clips click.
ECC is a hardware feature of the DRAM and register; it operates automatically and does not rely on firmware updates.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?