暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC RDIMM MR25600-818K1 memory upgrade

SKU CH-JDGE-A4HXR

8GB DDR4 3200 ECC registered DIMM with CL22 latency and 1.2V operation for HPE servers

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection guards data integrity in server workloads
  • DDR4 3200 speed matches HPE Smart Memory specifications
  • Registered RDIMM design supports stable multi-module configurations
  • 2 V operation reduces power draw per module
  • 288-pin DDR4 form factor fits HPE server slots

HPE Server ECC RDIMM Upgrade

This 8 GB DDR4 3200 module is built for HPE servers and workstations that require registered ECC memory. It suits IT administrators expanding capacity in supported platforms without changing existing memory configurations.

Registered 288-Pin Design

The module uses a 1Rx8 organisation at 1.20 V with CL22 latency and no heat spreader. Registered signalling and ECC protect data integrity in multi-DIMM arrays, while the standard 288-pin form factor fits approved HPE slots directly.

Replaces Slower or Smaller DDR4 RDIMMs

The jump is worthwhile when current memory runs below 3200 MT/s or when additional ranks are needed for larger workloads. Buyers needing higher densities per slot or non-ECC memory for consumer boards should look elsewhere.

特長

  • ECC protection guards data integrity in server workloads
  • DDR4 3200 speed matches HPE Smart Memory specifications
  • Registered RDIMM design supports stable multi-module configurations
  • 2 V operation reduces power draw per module
  • 288-pin DDR4 form factor fits HPE server slots

仕様

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHPE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

この商品に関する質問

What DDR4 standard does this RDIMM follow and what speed does it cap at?

It follows the PC4-25600 standard and runs at DDR4 3200 speed.

What physical slot and pin count does this 8 GB module require?

It fits a 288-pin DDR4 RDIMM slot on HPE server or workstation boards.

How do I install this registered ECC DIMM and what step is often missed?

Power down, open the chassis, align the notch with the keyed slot, press firmly until the ejector clips click, then enable ECC in the system BIOS.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。