OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
NEMIX RAM
ECC registered DDR4-3200 RDIMM module adds 8 GB to Thinkmate HDX servers
This 8 GB DDR4 3200 MHz registered DIMM adds error-correcting memory to compatible ThinkMate HDX-QT and HDX-QN high-density servers. It installs in a standard 288-pin slot and runs at 1.20 V with CL22 latency. The single-rank 1Rx8 module uses Samsung, Micron or Hynix chips and is validated for the listed ThinkMate platforms. Builders needing non-ECC or unbuffered memory should look elsewhere.
The module operates at the JEDEC-standard 1.20 V without a heat spreader, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the server memory controller during normal operation. No active cooling or additional power connectors are required. Systems constrained to very low airflow envelopes may need verification.
Each module undergoes rigorous stress testing under load before shipment to confirm stability in continuous enterprise workloads. ECC detection corrects single-bit errors that can accumulate during long-running compute tasks. The registered design helps maintain signal integrity across fully populated channels over extended periods. Compatibility is limited to the specific ThinkMate models listed.
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-818K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory |
Power down the server, open the chassis, align the 288-pin module with the DDR4 slot notch, press firmly until the retention clips lock, then verify in BIOS that the 1Rx8 registered ECC module is recognised at 3200 MT/s.
No scheduled maintenance is required; the module has no heat spreader and runs at 1.20 V, so only replace it if a memory test reports uncorrectable ECC errors or capacity becomes insufficient.
The CAS latency of 22 cycles at 3200 MT/s sets the baseline access latency; under continuous load the memory controller's throughput ceiling is reached before thermal limits because the module operates at standard 1.20 V without a spreader.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?