暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 96GB kit

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5-5600 ECC Registered RDIMM CL46 1.1V 288-Pin for Supermicro H13SST-GC

SKU CH-P33V-YABA8

A 96 GB DDR5-5600 registered ECC kit built for the Supermicro H13SST-GC motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

他に 24点の構成を表示
  • 96 GB capacity from two 48 GB modules expands server memory headroom
  • DDR5-5600 speed rated at PC5-44800 delivers high bandwidth for demanding workloads
  • Registered ECC design with CL46 latency corrects single-bit errors and stabilises fully populated channels
  • 10 V operation at 288-pin RDIMM form factor matches Supermicro H13SST-GC memory controller requirements
  • 2Rx8 rank organisation enables maximum density per slot without exceeding platform limits

96GB DDR5-5600 ECC RDIMM Kit

This 96GB kit contains two 48GB DDR5-5600 ECC Registered RDIMM modules. Each module runs at 1.1V with CL46 latency and a 2Rx8 organisation. The 288-pin form factor matches the Supermicro H13SST-GC motherboard requirements.

Suited for Supermicro H13SST-GC upgrades

Registered ECC architecture allows full-slot population while correcting single-bit errors on the fly. Builders who need unbuffered UDIMMs or laptop SODIMMs cannot use this kit. Systems that require a different voltage, speed or rank structure should look elsewhere.

DDR5-5600 Registered ECC specification

The memory controller expects DDR5-5600 (PC5-44800) Registered ECC modules at 1.1V with CL46 timing. Confirm the motherboard manual for supported capacities and population order before installation.

特長

  • 96 GB capacity from two 48 GB modules expands server memory headroom
  • DDR5-5600 speed rated at PC5-44800 delivers high bandwidth for demanding workloads
  • Registered ECC design with CL46 latency corrects single-bit errors and stabilises fully populated channels
  • 10 V operation at 288-pin RDIMM form factor matches Supermicro H13SST-GC memory controller requirements
  • 2Rx8 rank organisation enables maximum density per slot without exceeding platform limits

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the Supermicro H13SST-GC motherboard need to support DDR5 5600 Registered ECC RDIMMs for this 96GB kit to work?

Yes, the board must accept DDR5 5600 PC5-44800 2Rx8 Registered ECC RDIMMs at 1.1V with CL46 timing; this kit matches those exact specifications.

Will this 2Rx8 DDR5 5600 kit populate correctly if the Supermicro H13SST-GC manual calls for a specific DIMM population order?

The kit follows the standard 288-pin RDIMM form factor and 2Rx8 rank structure; consult the motherboard manual for the approved slot sequence to ensure full 96GB recognition.

How can I confirm the system sees both 48GB modules running at DDR5 5600 with ECC active?

Check the BIOS memory information or OS tools for 96GB total capacity, DDR5 5600 speed, CL46 latency, 1.1V voltage, and ECC status reported as enabled.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。