暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 6400 CL52 2Rx8 ECC RDIMM memory upgrade for GIGABYTE MS34-CP0

SKU CH-30EW-TE4VK

A 96 GB DDR5 registered ECC kit in two 48 GB modules running at 6400 MT/s with CL52 latency for the GIGABYTE MS34-CP0 motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 96 GB total capacity lets servers handle large workloads with a 2 × 48 GB kit
  • DDR5 6400 speed (PC5-51200) delivers rated throughput for the GIGABYTE MS34-CP0
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • CL52 latency at 1.1 V matches the board's timing and voltage requirements
  • 288-pin RDIMM form factor fits the exact slot type the motherboard expects

Exact-match upgrade for GIGABYTE MS34-CP0

This 96GB kit delivers two 48GB DDR5 RDIMMs rated at 6400 speed with CL52 latency. Registered ECC architecture and 1.1V operation match the board's memory controller expectations so the full capacity is recognised at rated frequency. It targets server administrators who need validated population without manual tuning.

Registered RDIMM build with 288-pin interface

The modules use a 2Rx8 organisation and registered buffering to reduce electrical load on the memory controller when every slot is populated. ECC corrects single-bit errors on the fly to prevent silent data corruption. No heat spreader is fitted, so airflow in the chassis must be sufficient for sustained server workloads.

Replaces smaller or slower DDR5 RDIMM kits

The jump is worthwhile when the platform supports 48GB dual-rank modules and the workload demands maximum registered ECC capacity at 6400 speed. Builders who need UDIMM or SODIMM form factors, non-ECC operation, or lower voltages cannot use this kit.

特長

  • 96 GB total capacity lets servers handle large workloads with a 2 × 48 GB kit
  • DDR5 6400 speed (PC5-51200) delivers rated throughput for the GIGABYTE MS34-CP0
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • CL52 latency at 1.1 V matches the board's timing and voltage requirements
  • 288-pin RDIMM form factor fits the exact slot type the motherboard expects

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What DDR5 speed and CAS latency does this 96GB RDIMM kit run at?

The kit operates at DDR5-6400 (PC5-51200) with a CAS latency of CL52.

What physical slot and form factor does this memory require on the GIGABYTE MS34-CP0?

It uses 288-pin DDR5 RDIMM slots; the board must accept registered DIMMs, not UDIMM or SODIMM.

In which order should the two 48GB modules be installed on this motherboard?

Follow the motherboard manual's DIMM population sequence for 2Rx8 registered ECC modules to ensure full capacity recognition.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。