暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 96GB (6x16GB) DDR5 4800 CL40 ECC RDIMM Cisco UCS X210c M7 memory upgrade

SKU CH-42Q4-Z6XVA

96GB DDR5 4800 CL40 ECC RDIMM kit of six 16GB modules for Cisco UCS X210c M7 compute nodes

  • Capacity96GB (6 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 96GB total capacity scales memory-intensive workloads
  • DDR5 4800 speed with CL40 latency delivers responsive data access
  • ECC registered design detects and corrects single-bit errors
  • 1V operation reduces power draw per module
  • Six 16GB 288-pin RDIMMs populate Cisco UCS X210c M7 slots

Cisco UCS X210c M7 memory kit

This 96GB kit contains six 16GB DDR5 RDIMM modules built for the Cisco UCS X210c M7 compute node. Each module runs at 4800MT/s with CL40 latency and 1.10V operation. ECC and registered buffering protect data integrity in mission-critical workloads. The kit is validated for the specified Cisco platform.

288-pin DDR5 RDIMM installation

Modules plug into the node’s 288-pin DDR5 slots and draw 1.10V without a heat spreader. Registered design reduces electrical load on the memory controller, freeing headroom for full population. ECC corrects single-bit errors on the fly, preserving uptime under sustained load. The 1Rx8 organisation keeps signal integrity tight across all six slots.

Upgrade from lower-capacity DDR5 RDIMM sets

Replacing smaller or slower DDR5 RDIMM kits with this 96GB configuration adds capacity for virtualisation density and large dataset caching. The jump is worthwhile when the node hits memory pressure or when workloads demand registered ECC at 4800MT/s. Systems already running at this speed and capacity see no benefit.

特長

  • 96GB total capacity scales memory-intensive workloads
  • DDR5 4800 speed with CL40 latency delivers responsive data access
  • ECC registered design detects and corrects single-bit errors
  • 1V operation reduces power draw per module
  • Six 16GB 288-pin RDIMMs populate Cisco UCS X210c M7 slots

仕様

BrandNEMIX RAM
SeriesCisco Server Compatible Series Memory
ModelCisco DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemCisco
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content96GB (6X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

この商品に関する質問

Does the CL40 latency become a bottleneck when the six 16 GB modules run at 4800 MT/s all day?

CL40 is the rated latency at 4800 MT/s; the modules operate at that timing continuously under load.

How much heat does the 1.1 V registered kit produce inside a Cisco UCS X210c M7 chassis during sustained workloads?

The 1.1 V DDR5 RDIMMs run at standard server voltage and rely on the node’s built-in airflow for cooling.

Must the Cisco UCS X210c M7 compute node already have empty 288-pin DDR5 RDIMM slots to accept this 96 GB kit?

Yes, the kit requires six free 288-pin DDR5 RDIMM slots in the compute node.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。