暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 96GB (6x16GB) DDR5 5600 ECC RDIMM CL46 1.1V 1Rx8 GIGABYTE MS34-CP0 memory upgrade

SKU CH-Q9HD-TVT6T

Six 16 GB DDR5 registered ECC RDIMMs running at 5600 MT/s CL46 1.1 V, validated for the GIGABYTE MS34-CP0 motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96 GB total capacity from six 16 GB modules for maximum server density
  • DDR5-5600 speed with CL46 latency delivers rated throughput on the GIGABYTE MS34-CP0
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation at 1Rx8 rank matches the board's memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the specified motherboard slots without adapters

Exact-match DDR5-5600 kit for Gigabyte MS34-CP0

This 96 GB kit contains six 16 GB registered ECC RDIMMs built to DDR5-5600 PC5-44800 specifications. It targets administrators upgrading a Gigabyte MS34-CP0 motherboard where the memory controller requires the exact rank, voltage and timing profile supplied here. Each module is a 288-pin DDR5 RDIMM rated at CL46 and 1.1 V.

Registered design with ECC for full-slot stability

The registered architecture buffers address and command signals so all six slots can run populated at rated speed without overloading the memory controller. On-die ECC corrects single-bit errors in flight, preventing silent data corruption and unplanned reboots in production workloads. Modules ship without heat spreaders, matching the board's mechanical clearance and airflow expectations.

Replaces mixed-capacity or slower DDR5 RDIMMs

The jump is worth it when the server currently runs a partial population, mixed-rank modules or lower-speed DDR5 that forces the controller to downclock. Installing the full six-module kit restores the platform's maximum supported bandwidth and capacity in one step. Buyers who need a different total capacity, UDIMM form factor or non-ECC operation should look elsewhere.

特長

  • 96 GB total capacity from six 16 GB modules for maximum server density
  • DDR5-5600 speed with CL46 latency delivers rated throughput on the GIGABYTE MS34-CP0
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation at 1Rx8 rank matches the board's memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the specified motherboard slots without adapters

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What DDR5 speed and PC5 rating does this 96GB kit run at?

The kit operates at DDR5 5600 with a PC5 44800 data rate, matching the GIGABYTE MS34-CP0 motherboard specification.

Which physical form factor and pin count must the MS34-CP0 board accept for these modules?

Each module is a 288-pin DDR5 RDIMM; the board requires registered DIMM slots, not UDIMM or SODIMM sockets.

In what order should the six 1Rx8 sticks be populated on the MS34-CP0, and what step is often missed?

Follow the motherboard manual for approved DIMM population order; the step often missed is verifying the exact slot sequence before installing all six modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。