暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 6400 CL52 1.1V 2Rx4 ECC Registered RDIMM Supermicro H14SHM memory upgrade

SKU CH-ZSX9-CFZD7

96 GB DDR5 6400 CL52 1.1 V 2Rx4 ECC registered RDIMM built for Supermicro H14SHM motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 96 GB capacity enables dense server memory configurations
  • DDR5 6400 speed with CL52 latency delivers rated performance
  • 1 V registered ECC design reduces controller load and corrects errors
  • 2Rx4 288-pin RDIMM form factor matches Supermicro H14SHM requirements
  • Built with major OEM chips for enterprise-grade reliability

96GB DDR5 6400 CL52 Registered ECC RDIMM

This 96GB DDR5 6400 module delivers PC5-51200 bandwidth at CL52 latency with a 1.1V operating voltage. It uses a 2Rx4 registered ECC design on a 288-pin RDIMM form factor built for the Supermicro H14SHM motherboard. Enterprise servers and workstations that require exact rank, voltage and timing matching will recognise the module at full capacity and rated speed.

Thermals noise and power draw

Registered buffering reduces electrical load on the memory controller, helping maintain stable operation when all slots are populated. ECC circuitry corrects single-bit errors on the fly without halting the system, preventing silent data corruption and unplanned reboots. The 1.1V DDR5 baseline keeps power draw predictable for dense memory configurations in rack environments.

Build fit and requirements

The 288-pin RDIMM form factor fits only motherboards that accept registered DDR5 modules; it will not work in UDIMM or SODIMM slots. Population order and maximum supported capacity depend on the H14SHM memory rules, so the system or motherboard manual must be consulted before installation. No heat spreader is included, leaving clearance for standard server airflow paths.

特長

  • 96 GB capacity enables dense server memory configurations
  • DDR5 6400 speed with CL52 latency delivers rated performance
  • 1 V registered ECC design reduces controller load and corrects errors
  • 2Rx4 288-pin RDIMM form factor matches Supermicro H14SHM requirements
  • Built with major OEM chips for enterprise-grade reliability

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

How do I install the 288-pin RDIMM in the Supermicro H14SHM, and what step is often missed?

Power off the server, open the chassis, and insert the module into the correct slot following the motherboard's population order; the step most often missed is consulting the manual for the exact slot sequence before seating the DIMM.

What maintenance or replacement will the 96GB DDR5 6400 CL52 module need over time?

No routine maintenance is required; if a failure occurs the module is covered by a lifetime replacement warranty, so you would request a replacement rather than perform any service.

What limit appears first when the 1.10V 2Rx4 registered ECC memory runs under sustained load?

The registered buffer and ECC logic keep every slot stable at full capacity, so the first limit encountered is the motherboard's maximum supported memory capacity or slot count, not the module itself.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。