SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00501779BTC
在庫あり
NEMIX RAM
NEMIX RAM CSE-735D4-1K26B 256GB (2x128GB) DDR5 4800 ECC RDIMM memory upgrade
256 GB DDR5-4800 ECC registered server memory kit, two 128 GB RDIMMs at 1.1 V CL40 for SuperMicro workstations
- Capacity256GB (2 x 128GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256 GB kit (2 × 128 GB) scales memory capacity for heavy workloads
- DDR5 4800 MT/s (PC5-38400) delivers high throughput for server tasks
- ECC RDIMM with CL40 latency protects data integrity under load
- 1 V operating voltage reduces power draw per module
- Validated for SuperMicro SuperWorkstation SYS-531A-I compatibility
Server-grade DDR5 ECC RDIMM kit
This 256 GB kit contains two 128 GB registered DDR5 modules built for Supermicro SuperWorkstation SYS-531A-I systems. ECC and registered buffering protect data integrity in mission-critical workloads. The modules run at 4800 MT/s with CL40 latency at 1.10 V. No heat spreaders are fitted.
Sustained-load behaviour
Registered buffering and on-die ECC maintain stability during continuous multi-threaded workloads such as virtualisation, database serving or scientific compute. The 4Rx4 organisation increases density per channel without adding electrical load. Modules are stress-tested under load before shipment to verify long-term reliability.
Deciding specification
The kit is validated only for the Supermicro SuperWorkstation SYS-531A-I platform using the CSE-735D4-1K26B part number. Builders targeting any other motherboard or workstation model cannot rely on this compatibility. Supermicro X13SRA-TF is the referenced board for this configuration.
特長
- 256 GB kit (2 × 128 GB) scales memory capacity for heavy workloads
- DDR5 4800 MT/s (PC5-38400) delivers high throughput for server tasks
- ECC RDIMM with CL40 latency protects data integrity under load
- 1 V operating voltage reduces power draw per module
- Validated for SuperMicro SuperWorkstation SYS-531A-I compatibility
仕様
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-744K2 |
| Capacity | 256GB (2 x 128GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (2X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
この商品に関する質問
How much heat does the 1.1 V DDR5 4800 ECC RDIMM kit generate when the SuperMicro SYS-531A-I runs continuously?
Each 128 GB module operates at 1.10 V with CL40 latency; registered buffering and ECC add minimal overhead, so sustained power draw stays close to the rated voltage across both DIMMs.
What motherboard slot and BIOS support are required to run this 256 GB DDR5 4800 ECC RDIMM kit in the SuperMicro SYS-531A-I?
The kit uses 288-pin DDR5 RDIMM form factor; the SYS-531A-I provides matching slots and its BIOS recognises 4Rx4 registered ECC modules at 4800 MT/s without extra configuration.
Will the 4Rx4 registered ECC modules work alongside any existing DDR5 RDIMM sticks already installed in the SuperMicro SYS-531A-I?
All slots must use identical 4Rx4 registered ECC DIMMs at the same speed; mixing ranks or unbuffered modules prevents the memory controller from initialising the full 256 GB capacity.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
